Skip to content
Need help identifying a part? Contact parts support
SKU: 710010045Brand: Gates
,

4G-6MP: Gates Coupling, MegaCrimp Male Pipe (NPTF, 30 Cone Seat), -4 (1/4″) Dash Size, 0.25 (1/4″) ID, 3/8-18 Threads

$9.50

Gates Coupling – MegaCrimp Male Pipe (NPTF – 30 Cone Seat) -4 (1/4″) Dash Size 0.25 (1/4″) Inside Diameter 3/8-18 Threads

Quantity
SKU: 710010045 Categories: ,

Gates offers a wide variety of couplings, also called fittings, for their hose ends. National Pipe Tapered thread for Fuel, or NPTF, is a dryseal thread used for both male and female ends. The NPTF male will mate with the NPTF, NPSF, or NPSM female. The NPTF male has tapered threads and a 30 degree inverted seat. The NPTF femal has tapered threads and no seat. The NPSM female has straight threads and a 30 degree inverted seat. The seal takes place on the 30 degree seat. The NPTF connector is similar to, but not intechangeable with, the BSPT connector. The thread pitch is different in most sizes. Also, the thread angle is 60 degrees instead of the 55 degree angle found on BSPT threads. For maximum torque recommendations, please see page C29 in the selection guide. COUPLINGS MUST ONLY BE USED WITH RECOMMENDED COMPATIBLE HOSES. Please see the Compatible Hose referenced below to see which hoses this coupling may be utilized with. If you are unsure which coupling you need, please contact and we will be happy to assist you!

Buying Information

Confirm the listed model and specifications match the existing component before ordering.

Brand

Gates

GTIN / UPC

94135094

0
Scroll to Top