Skip to content
Need help identifying a part? Contact parts support
SKU: 2025173Brand: Streamline Carbon Steel
,

1-1/2 inch Carbon Steel Water Press 45 Degree Elbow Press x Press

$5.86

1/2″ Carbon Steel Press 45° Elbow – Press-Fit Directional Fitting for Water and Hydronic Systems The 1/2″ Carbon Steel Press 45° Elbow is a press-connect fitting used to achieve a 45-degree change in direction in pressurized water or hydronic piping systems.

Quantity
SKU: 2025173 Categories: ,

1/2″ Carbon Steel Press 45° Elbow – Press-Fit Directional Fitting for Water and Hydronic Systems

The 1/2″ Carbon Steel Press 45° Elbow is a press-connect fitting used to achieve a 45-degree change in direction in pressurized water or hydronic piping systems. Designed for use with carbon steel tubing, this fitting supports quick, flame-free installation using compatible press tools, making it ideal for mechanical system layouts requiring efficient space utilization and reduced joint count.

Manufactured from corrosion-resistant carbon steel, the fitting is engineered to meet code requirements for potable water, HVAC closed-loop systems, and general plumbing applications where mechanical press connections are specified. The elbow is suitable for both new construction and retrofit work where directional transitions are required in horizontal or vertical pipe runs.

Key Performance Features

  • ✅Press-Connect Technology– Designed for fast, flame-free installation with carbon steel press systems using approved tools and jaws.
  • ✅High Strength Material– Constructed from carbon steel, providing long-term structural integrity and pressure resistance.
  • ✅Precision-Bent Geometry– 45° sweep ensures minimal flow disruption and consistent directional transition.
  • ✅Mechanical Reliability– Tightly machined press ends ensure uniform compression and leak-resistant joint formation.
  • ✅Code Compliance– Approved for use in installations meeting IPC, UPC, ASME B31.9, and other applicable mechanical codes.

Technical Specifications

  • MaterialCarbon Steel
  • Size1/2″ nominal
  • Connection TypePress x Press
  • Bend Angle45 Degrees
  • Sealing ElementEPDM or HNBR (verify per system type)
  • Pressure RatingUp to 200 PSI (per press system specification)
  • Temperature Range32°F – 250°F (dependent on gasket material)

Installation Guidelines

Ensure pipe is cut square, deburred, and marked for proper insertion depth. Fitting must be installed using an approved carbon steel press tool and compatible jaw set. Check gasket for integrity prior to pressing. Always follow the manufacturer’s installation procedures and applicable plumbing or mechanical code requirements.

Typical Applications

Used in domestic water supply, hydronic heating, chilled water distribution, and mechanical piping systems requiring directional changes with a small footprint. Especially useful in wall cavities, mechanical rooms, or ceiling runs where spacing is constrained and flame-based joining is not permitted.

Material Considerations

Carbon steel press fittings offer high mechanical strength, corrosion resistance (with proper surface treatment), and compatibility with press-fit installation standards. Their use reduces labor time and supports compliance in fire-restricted or confined work areas.

Specifications

Specifications Weight 0.240000 Brand Streamline Carbon Steel ADA Compliance No Angle 45 Deg Application Mechanical and Fire sprinkler Applications Length (inches) 1.2 Width (inches) 2.15 Height (inches) 3.2 End Style Press x Press Side A 1-1/2″ Side B 1-1/2″ Fitting Type Elbows Item Type Fittings Manufacturer Mueller MPN CP03026 Material Carbon Steel Product Family Fittings Warranty 15 Years Limited Item Returns This item can be returned

Buying Information

Confirm the listed pipe sizes and connection configuration match the system before ordering.

Brand

Streamline Carbon Steel

MPN

CP03026

0
Scroll to Top