Skip to content
Need help identifying a part? Contact parts support
SKU: 1952136Brand: Non-Specified Brand
,

1-1/2 inch Dielectric Union Female x Copper

$6.67

1-1/2 inch Dielectric Union – Isolation Fitting for Dissimilar Metal Connections The 1-1/2 inch Dielectric Union is a mechanical fitting used to prevent galvanic corrosion when joining dissimilar metals—such as copper and steel—within potable water or hydronic systems.

Quantity
SKU: 1952136 Categories: ,

1-1/2 inch Dielectric Union – Isolation Fitting for Dissimilar Metal Connections

The1-1/2 inch Dielectric Unionis a mechanical fitting used to prevent galvanic corrosion when joining dissimilar metals—such as copper and steel—within potable water or hydronic systems. It consists of a steel and brass body separated by a non-conductive polymer insulator to electrically isolate the connected piping materials.

Manufactured in compliance with ASTM and ASME standards, this union supports system longevity by mitigating electrochemical reactions that commonly degrade piping at transition points. It is suitable for use in both residential and commercial systems where metallic compatibility must be managed to maintain system integrity.

Performance Attributes

  • ✅Dielectric Insulation BarrierIntegrally molded polymer insulator electrically isolates the joined metals to prevent galvanic current transfer.
  • ✅Lead-Free Brass ComponentMeets NSF/ANSI 61 and 372 for use in potable water distribution systems.
  • ✅Threaded ConnectionsMale NPT x Female NPT or sweat options available; suitable for direct connection to copper, brass, galvanized, or steel piping.
  • ✅Corrosion ProtectionReduces joint failure risk from electrolysis and localized pitting at dissimilar metal transitions.
  • ✅Service-Friendly DesignUnion construction allows disconnection and reconnection without disturbing adjacent piping.

Technical Specifications

  • Nominal Size1-1/2 inch
  • Body MaterialSteel and Lead-Free Brass
  • Insulator MaterialEPDM or engineered polymer (dielectric barrier)
  • Connection TypeNPT Threaded (options may include sweat x thread)
  • CertificationNSF/ANSI 61 & 372; compliant with ASME B16.39

Installation Considerations

Apply thread sealant or PTFE tape to male threads to ensure proper sealing. Use two wrenches during installation to avoid damaging the union or nearby piping. Do not overtighten. Verify that the dielectric insert remains intact during tightening to preserve isolation. Follow local plumbing code requirements regarding placement of dielectric fittings in copper-to-steel transitions.

Typical Use Cases

Installed in hot and cold water distribution lines, hydronic heating loops, and risers where copper piping interfaces with galvanized or black steel. Frequently located near water heaters, manifolds, or meter connections to prevent corrosion due to dissimilar metal contact.

Code Compliance Note

Dielectric unions are recommended or required by plumbing codes in applications where dissimilar metals may be joined. Lead-free construction is mandated for potable systems under the U.S. Safe Drinking Water Act.

The1-1/2 inch Dielectric Unionoffers a field-tested solution for mitigating corrosion at metallic transition points. Its compliant design and durable construction help maintain water quality and system longevity across a range of plumbing and mechanical installations.

Specifications

Specifications Weight 1.000000 Brand Non-Specified Brand ADA Compliance No Length (inches) 3 Width (inches) 3 Height (inches) 3 End Style Female x Copper Side A 1-1/2″ Side B 1-1/2″ Fitting Type Unions Item Type Fittings Manufacturer Non Specified Manufacturer MPN 301-107NL Material Copper Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed configuration and specifications for MPN 301-107NL before ordering.

Brand

Non-Specified Brand

MPN

301-107NL

0
Scroll to Top