Skip to content
Need help identifying a part? Contact parts support
SKU: 4855Brand: Non-Specified Brand
,

1-1/2″ ID x 20′ Copper Tubing, Straight Hard, Type M

$83.50

Streamline MH14020 – Type M Hard Copper Tubing, 1-1/2″ x 20′ Streamline MH14020 is a 20-foot length of straight, hard-drawn Type M copper tubing with a 1-1/2″ nominal size and 1-5/8″ outside diameter.

Quantity
SKU: 4855 Categories: ,

Streamline MH14020 – Type M Hard Copper Tubing, 1-1/2″ x 20′ Streamline MH14020 is a 20-foot length of straight, hard-drawn Type M copper tubing with a 1-1/2″ nominal size and 1-5/8″ outside diameter. Designed for above-ground water distribution systems, this tubing meets the requirements of ASTM B88 and is NSF certified for potable water use. It is color-coded red for Type M and incised marked for easy identification during installation. Manufactured for consistent wall thickness and dimensional accuracy, Streamline’s copper tube is suitable for a range of residential and commercial applications where moderate internal pressure ratings are acceptable under applicable codes. Product Specifications Type: Type M (straight, hard temper) Nominal Size: 1-1/2 inch Outside Diameter: 1.625 inches Wall Thickness: 0.042 inches Length: 20 feet Material: Copper (C12200, deoxidized, high phosphorus) Compliance: ASTM B88, NSF/ANSI 61 and 372 certified Markings: Incised and color-coded per type standard (Type M = red) Key Features Suitable for residential water supply lines Corrosion-resistant, long-lasting copper construction Straight hard temper allows for rigid installation and support Marked and color-coded for code compliance and fast job site identification Meets third-party certification for drinking water safety and performance standards Application Notes This tubing is primarily used in interior water distribution systems and other applications permitted by code for Type M copper. It is not intended for underground or high-pressure use unless specifically approved. Brazing or soldering should be performed using compatible joining materials rated for potable water systems. Proper cutting, cleaning, and joint preparation are essential to ensure leak-free service. Installation should follow local plumbing code requirements and standard copper tube handling practices.

Specifications

Specifications Weight 18.800000 Length (inches) 8.88 Width (inches) 1 Height (inches) 8.88 Item Type Copper Tubing Brand Non-Specified Brand Form Straight Line Set Insulation Type Single Line Insulated Manufacturer Non Specified Manufacturer MPN MH14020 Sub Type Plumbing Water Tube Nominal Size 1-1/2 in Material Copper Item Returns This item can be returned

Buying Information

Confirm model MH14020 and the listed specifications against the existing component before ordering.

Brand

Non-Specified Brand

MPN

MH14020

0
Scroll to Top