Skip to content
Need help identifying a part? Contact parts support
SKU: 2027059Brand: Streamline Carbon Steel
,

1-1/2 inch Carbon Steel Water Press Cap

$15.93

Streamline Carbon Steel 1-1/2 Inch Carbon Steel Press Cap for Water System Termination The 1-1/2 inch carbon steel press cap is designed for terminating press-fit piping in high-pressure water distribution systems.

Quantity
SKU: 2027059 Categories: ,

Streamline Carbon Steel

1-1/2 Inch Carbon Steel Press Cap for Water System Termination

The 1-1/2 inch carbon steel press cap is designed for terminating press-fit piping in high-pressure water distribution systems. It provides a mechanically sealed end-of-line closure in potable water, hydronic, and mechanical piping applications. This fitting offers reliable performance in both new construction and retrofit installations.

Material Composition and Structural Design

Fabricated from carbon steel, this press cap is engineered for strength, dimensional precision, and long-term sealing performance under fluctuating system pressures. It is compatible with press tools that conform to standard jaw configurations for carbon steel systems.

  • ✅Precision-Formed Press EndEnsures consistent jaw alignment and uniform crimping for a secure mechanical seal.
  • ✅Corrosion-Resistant CoatingSurface-treated to inhibit oxidation and maintain material integrity in potable water systems.
  • ✅Lead-Free ComplianceSuitable for use in systems regulated for potable water delivery.

Installation Requirements

Installation requires the use of approved press tools. The pipe end must be properly prepared—square-cut, deburred, and cleaned—prior to insertion into the cap. No thread sealant is required. Pressing should be completed using tool jaws that match the specified diameter and profile of the fitting.

Product Advantages

  • ✅Pressure-Rated ClosureMaintains system seal integrity in static and dynamic water pressure conditions.
  • ✅Mechanical End CapEliminates the need for threaded plugs or welded terminations.
  • ✅Press-to-InstallReduces labor time and avoids open-flame hazards associated with soldering or welding.

Technical Specifications

  • MaterialCarbon Steel
  • Size1-1/2 Inch
  • Connection TypePress
  • ComplianceConforms to applicable plumbing and mechanical codes for pressurized water systems

Common Applications

Used in domestic and commercial water distribution systems to terminate pipe runs at endpoints, capped branches, or during future system expansion. Also suitable for isolating unused system outlets during commissioning or modifications.

Material Insight

Carbon steel is chosen for its compressive strength, resistance to mechanical wear, and long-term durability in closed-loop and potable water applications. It performs reliably in systems requiring frequent pressure cycling and exposure to variable temperatures.

Specifications

Specifications Weight 0.560000 Brand Streamline Carbon Steel ADA Compliance No Application Mechanical and Fire sprinkler Applications Length (inches) 3.25 Width (inches) 2.95 Height (inches) 3.25 Side A 1-1/2″ Fitting Type Caps Item Type Fittings Manufacturer Mueller MPN CP07013 Material Carbon Steel Product Family Fittings Warranty 15 Years Limited Item Returns This item can be returned

Buying Information

Confirm the listed pipe sizes and connection configuration match the system before ordering.

Brand

Streamline Carbon Steel

MPN

CP07013

0
Scroll to Top