1-1/2 inch PVC DWV 60-Degree Elbow – Engineered for Tight Transitions and Reliable Drainage
The 1-1/2 inch PVC DWV 60-Degree Elbow is specifically designed for drain, waste, and vent (DWV) systems where space constraints or directional changes require a tighter angle than standard 90° or 45° fittings. This elbow provides a smooth transition with minimal flow restriction, making it ideal for branch connections or offsets in confined spaces.
Key Features and Benefits
- Angle Design60-degree bend enables directional changes in areas where a 45-degree or 90-degree elbow would be inefficient or incompatible.
- DWV ApplicationOptimized for non-pressurized systems, ensuring smooth, consistent flow of wastewater and air within building drainage systems.
- Slip ConnectionSlip x Slip ends accommodate solvent welding for a permanent and secure joint with Schedule 40 DWV pipe.
- Durable PVC MaterialManufactured from rigid polyvinyl chloride (PVC) offering corrosion resistance, chemical stability, and high tensile strength.
- Code ComplianceConforms to ASTM D2665 and CSA B181.2 standards for DWV fittings, ensuring suitability for residential and light commercial systems.
Technical Specifications
- MaterialSchedule 40 PVC (white)
- Nominal Size1-1/2 inches
- Connection EndsSlip x Slip
- Bend Angle60 degrees
- ApplicationDWV (Drainage, Waste, and Vent)
- StandardsASTM D2665, NSF 14, CSA B181.2
Installation Considerations
Ensure pipe and fitting ends are free of debris and dry before applying a medium-bodied PVC solvent cement. Follow manufacturer-recommended cure times based on temperature and humidity. For optimal system performance, maintain proper slope in horizontal runs and confirm alignment before setting.
Typical Use Cases
This 60-degree elbow is commonly installed in sanitary branch lines where limited space requires a reduced bend radius. It is frequently used in vertical-to-horizontal transitions in bathroom groups or utility rooms and can serve as a solution for alignment challenges during remodels or retrofits.
Did You Know?
60-degree elbows help minimize turbulence compared to 90-degree fittings, promoting better venting and waste flow, particularly in high-efficiency systems or when multiple fixtures share the same drain line.
The 1-1/2 inch PVC DWV 60-Degree Elbow is a practical, code-approved component for any professional-grade drainage installation. Its precision fit and durable construction support long-term reliability in modern DWV systems.




