Skip to content
Need help identifying a part? Contact parts support
SKU: 6987Brand: Non-Specified Brand
,

1-1/2 inch PVC Schedule 40 90 Degree Elbow Plastic x Plastic

$0.45

Schedule 40 PVC 90° Elbow – Socket x Socket Fitting for Directional Flow The 1-1/2 inch Schedule 40 PVC 90° Elbow is engineered to facilitate a directional change in piping systems where a right-angle turn is required.

Quantity
SKU: 6987 Categories: ,

Schedule 40 PVC 90° Elbow – Socket x Socket Fitting for Directional Flow

The 1-1/2 inch Schedule 40 PVC 90° Elbow is engineered to facilitate a directional change in piping systems where a right-angle turn is required. Commonly used in non-pressurized drain, waste, and vent (DWV) systems, this fitting is manufactured to ASTM D2466 standards and designed for solvent-weld connections.

Constructed from rigid polyvinyl chloride (PVC), the elbow provides corrosion resistance and dimensional stability across a broad range of temperatures and environmental conditions. Its socket x socket configuration is compatible with standard Schedule 40 PVC piping for code-compliant installations in residential, commercial, and light industrial projects.

Performance and Specification Highlights

  • ✅Material GradeNon-metallic, Schedule 40 PVC – conforms to ASTM D1784 (cell class 12454).
  • ✅Joint TypeSolvent-weld socket ends ensure secure, pressure-resistant connections.
  • ✅Nominal Size1-1/2 inch diameter – compatible with Schedule 40 pipe.
  • ✅Temperature RatingSuitable for fluid transport systems with max operating temperatures up to 140°F (60°C).
  • ✅Corrosion ResistanceInert to most acids, bases, salts, and organic compounds commonly encountered in DWV applications.

Installation and Use Guidelines

Installation requires the use of solvent cement and primer in accordance with ASTM F656 and F493 for PVC systems. Ends should be chamfered and cleaned prior to assembly to ensure proper adhesion. Fitting must be fully inserted and held in position during initial set time per cement manufacturer instructions.

Common Use Cases

Widely implemented in sanitary drainage systems, vent stacks, and horizontal-to-vertical transitions. Appropriate for installation behind walls, below slab, and in crawlspaces where directional flow is required within a compact footprint.

Additional Technical Notes

This 90° elbow is not intended for pressurized potable water systems. For applications exceeding 140°F or requiring chemical resistance beyond the scope of PVC, consider CPVC or other thermoplastic alternatives. Always verify material compatibility with intended media and pressure class before installation.

System Reliability through Code-Grade Components

The Schedule 40 PVC 90° Elbow is a standard component in code-compliant DWV systems, offering a balance of strength, precision, and chemical resistance. Ideal for jobsite consistency and long-term service in professional plumbing assemblies.

Specifications

Specifications Weight 0.240000 Brand Non-Specified Brand ADA Compliance No Angle 90 Deg Length (inches) 3 Width (inches) 2.23 Height (inches) 3.19 End Style Plastic x Plastic Side A 1-1/2″ Side B 1-1/2″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN 406-015 Material PVC Schedule 40 Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

406-015

0
Scroll to Top