Skip to content
Need help identifying a part? Contact parts support
SKU: 72406Brand: Fernco
,

1-1/2 inch or 1-1/4 inch Drain & Trap Connector

$1.09

1-1/2 inch Flexible Coupling – PVC and Cast Iron Transition Connector The 1-1/2 inch flexible coupling is a heavy-duty elastomeric fitting designed for joining two 1-1/2 inch nominal pipes of the same or dissimilar materials, such as PVC, cast iron, steel, or copper.

Quantity
SKU: 72406 Categories: ,

1-1/2 inch Flexible Coupling – PVC and Cast Iron Transition Connector

The 1-1/2 inch flexible coupling is a heavy-duty elastomeric fitting designed for joining two 1-1/2 inch nominal pipes of the same or dissimilar materials, such as PVC, cast iron, steel, or copper. Manufactured from flexible PVC and secured using corrosion-resistant stainless steel clamps, this coupling accommodates slight pipe misalignment and movement while maintaining a watertight seal.

It is commonly used in gravity-flow drainage, waste, and vent systems, and is certified for underground and above-grade installations. The coupling conforms to applicable performance standards for non-pressure pipe connections in residential and commercial plumbing systems.

Product Features

  • ✅Size1-1/2 inch nominal pipe size
  • ✅MaterialFlexible PVC body with 300-series stainless steel bands and screw housings
  • ✅Connection TypeMechanical joint secured with stainless steel torque clamps
  • ✅ApplicationFor use in non-pressurized DWV and sewer systems
  • ✅Temperature Range30°F to 140°F continuous service

Installation Guidelines

Ensure that pipe ends are clean and square-cut prior to installation. Position the coupling over the joint, center the band over the gap, and tighten stainless steel clamps to manufacturer-specified torque (typically 60 in-lbs) using a calibrated torque wrench or screwdriver. Proper installation ensures long-term resistance to infiltration, exfiltration, and root intrusion in buried applications.

Common Applications

This coupling is suitable for repairs, transitions, and retrofits in drain, waste, and vent lines. It is frequently used in sanitary sewer laterals, vent stacks, and under-slab plumbing where quick mechanical connection between dissimilar piping is required without the need for solvent welding or threading.

Regulatory Compliance

Flexible couplings of this type are tested to and meet the requirements of ASTM C1173 and are certified to UPC and CSA B602 standards. Accepted by major model plumbing codes for use in DWV and sewer applications.

Technical Specifications

  • Nominal Size1-1/2 inch
  • Body MaterialPVC conforming to ASTM C1173
  • Clamp MaterialStainless Steel (Type 300 series)
  • StandardsUPC, CSA B602, ASTM C1173
  • Pressure RatingFor use in non-pressure systems only

Specifications

Specifications Weight 0.200000 Brand Fernco ADA Compliance No Length (inches) 2.16 Width (inches) 2.16 Height (inches) 2.25 Side A 1-1/2″ to 1-1/4″ Fitting Type Coupling Item Type Fittings Manufacturer Fernco, Inc. MPN DTC-150 Material Rubber Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size, connection, or rating details for MPN DTC-150 before ordering.

Brand

Fernco

MPN

DTC-150

0
Scroll to Top