Skip to content
Need help identifying a part? Contact parts support
SKU: 5488Brand: Non-Specified Brand
,

1-1/2 inch x 1/2 inch x 1-1/2 inch Copper Reducing Tee Copper x Copper x Copper

$20.05

1-1/2 inch x 1/2 inch x 1-1/2 inch Copper Reducing Tee – Wrot Copper, Sweat Ends The 1-1/2 inch x 1/2 inch x 1-1/2 inch Copper Reducing Tee is a precision-formed wrot copper fitting designed for use in soldered copper tube systems.

Quantity
SKU: 5488 Categories: ,

1-1/2 inch x 1/2 inch x 1-1/2 inch Copper Reducing Tee – Wrot Copper, Sweat Ends

The 1-1/2 inch x 1/2 inch x 1-1/2 inch Copper Reducing Tee is a precision-formed wrot copper fitting designed for use in soldered copper tube systems. This reducing tee allows for a direct branch line reduction from 1-1/2 inch main lines to a 1/2 inch outlet, making it suitable for hot and cold potable water, hydronic heating, and other pressurized water service applications. All outlets are designed for sweat (cup) connections.

Applications

  • Potable water distribution systems
  • Hydronic heating loops
  • Residential and commercial building plumbing layouts

Product Features

  • ✅Wrot Copper ConstructionMeets ASTM B75 and B88 specifications for strength, corrosion resistance, and workability
  • ✅Lead-Free ComplianceCertified to NSF/ANSI 61 and NSF 372 for safe use in potable water systems
  • ✅Accurate FormingFactory-formed to ensure consistent dimensions and reliable alignment during installation

Technical Specifications

  • MaterialWrot copper (C12200)
  • Nominal SizesMain line inlets/outlets – 1-1/2 inch; branch – 1/2 inch
  • Connection TypeSweat (socket) x Sweat x Sweat
  • StandardsASME B16.22; Lead-Free under Federal Public Law 111-380 (Reduction of Lead in Drinking Water Act)

Installation Guidance

Install using conventional soldering practices for copper tube. Clean mating surfaces with emery cloth or brush; apply approved flux; heat evenly and apply lead-free solder to achieve full capillary action around joints. Proper support and alignment are essential to maintain correct branch geometry and ensure long-term service integrity.

Best Practices

  • ✅ Use Type L or Type M copper tubing as specified by code or application requirements
  • ✅ Ensure all joints are cleaned and fluxed prior to heating to promote full solder penetration
  • ✅ Support assemblies during soldering to prevent joint stress or misalignment

Performance Notes

This reducing tee is suitable for systems operating up to 400°F and 200 PSI, consistent with standard copper tube ratings. The use of lead-free solder and approved flux is required for code compliance in potable systems.

The 1-1/2 inch x 1/2 inch x 1-1/2 inch Copper Reducing Tee offers a durable, corrosion-resistant transition fitting ideal for long-term performance in new construction or retrofit copper piping systems. Its dimensional accuracy and certified materials make it a dependable choice for commercial and residential applications requiring pressure-rated fittings.

Specifications

Specifications Weight 0.680000 Brand Non-Specified Brand ADA Compliance No Length (inches) 1.7 Width (inches) 4.7 Height (inches) 2.9 End Style Copper x Copper x Copper Side A 1-1/2″ Side B 1/2″ Side C 1-1/2″ Fitting Type Tees Item Type Fittings Manufacturer Non Specified Manufacturer MPN W 40244 Material Copper Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed configuration and specifications for MPN W 40244 before ordering.

Brand

Non-Specified Brand

MPN

W 40244

0
Scroll to Top