Skip to content
Need help identifying a part? Contact parts support
Sale!
SKU: 5854Brand: Non-Specified Brand
,

1-1/2 inch x 36 inch Black Steel Nipple

Original price was: $29.06.Current price is: $7.27.

1-1/2″ x 36″ Black Steel Nipple – Schedule 40, Threaded Pipe Segment for Industrial and Mechanical Use The 1-1/2″ x 36″ Black Steel Nipple is a Schedule 40 carbon steel pipe nipple, threaded NPT on both ends, suitable for use in pressure-rated gas, air, steam, and water distributi…

Quantity

1-1/2″ x 36″ Black Steel Nipple – Schedule 40, Threaded Pipe Segment for Industrial and Mechanical Use

The 1-1/2″ x 36″ Black Steel Nipple is a Schedule 40 carbon steel pipe nipple, threaded NPT on both ends, suitable for use in pressure-rated gas, air, steam, and water distribution systems. Manufactured from ASTM A53 Grade B or equivalent material, this fitting provides a continuous 36-inch extension for use in mechanical assemblies requiring long runs without intermediate joints.

Black steel nipples are commonly used in both above-ground and concealed piping systems. Their uniform wall thickness and corrosion-resistant black oxide coating offer protection during handling and installation, while maintaining compatibility with standard threaded steel fittings, valves, and system components.

Technical Specifications

  • Nominal Pipe Size1-1/2 inch
  • Length36 inches (3 feet)
  • MaterialCarbon Steel (ASTM A53 Grade B, welded or seamless)
  • Wall ThicknessSchedule 40
  • ConnectionMale NPT x Male NPT (ASME B1.20.1)
  • FinishBlack oxide coating
  • Pressure RatingUp to 150 PSI (varies by application and system design)

Performance Features

  • ✅Threaded EndsMachined NPT threads ensure compatibility with standard fittings and leak-tight seals when used with thread sealant.
  • ✅Long-Length FabricationProvides extended reach without requiring coupling, minimizing potential leak points.
  • ✅Mechanical DurabilitySchedule 40 construction supports system integrity in dynamic or vibration-prone applications.
  • ✅Black FinishOffers basic corrosion resistance in dry and low-humidity environments, ideal for utility and concealed installations.

Common Applications

This 1-1/2″ x 36″ nipple is used in commercial and industrial systems including

  • Gas and propane piping networks
  • Low-pressure steam systems
  • Hydronic heating and chilled water lines
  • Compressed air or non-potable utility piping

Installation Guidance

Apply PTFE tape or thread compound to male threads before installation. Use pipe wrenches to tighten to the specified torque. Ensure alignment and pipe support meet applicable plumbing and mechanical codes to prevent joint stress and system failure.

Compliance Note

This product is not certified for potable water systems unless explicitly marked lead-free and listed accordingly. Use only in systems permitted under ASME B31.1 or B31.3 mechanical codes, and verify compatibility with project specifications and local requirements.

Conclusion

The 1-1/2″ x 36″ Black Steel Nipple provides a structurally sound, pressure-rated extension for threaded piping systems in HVAC, mechanical, and industrial settings. With its Schedule 40 construction and corrosion-resistant finish, it supports long-lasting performance in rigid and high-demand piping assemblies.

Specifications

Specifications Weight 8.160000 Brand Non-Specified Brand ADA Compliance No Length (inches) 36 Width (inches) 1.5 Height (inches) 1.5 Side A 1-1/2″ Side B 36″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN 587-360HC Material Black Steel Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size and threaded connection details for MPN 587-360HC before ordering.

Brand

Non-Specified Brand

MPN

587-360HC

0
Scroll to Top