Skip to content
Need help identifying a part? Contact parts support
SKU: 4862Brand: Non-Specified Brand
,

1-1/4″ ID x 10′ Copper Tubing, Straight Hard, Type M

$30.33

Streamline MH12010 – 1-1/4″ x 10′ Type M Hard Copper Tubing for Pressure Water Systems The Streamline MH12010 is a 10-foot section of Type M rigid copper tubing designed for above-ground pressure applications in potable water distribution, HVAC systems, and general plumbing.

Quantity
SKU: 4862 Categories: ,

Streamline MH12010 – 1-1/4″ x 10′ Type M Hard Copper Tubing for Pressure Water Systems The Streamline MH12010 is a 10-foot section of Type M rigid copper tubing designed for above-ground pressure applications in potable water distribution, HVAC systems, and general plumbing. With a nominal inside diameter of 1-1/4″, outside diameter of 1-3/8″, and a wall thickness of 0.042″, this straight-length copper tube meets industry requirements for strength, dimensional consistency, and corrosion resistance. Manufactured to ASTM B88 specifications, this tubing is incised-marked for type identification and color-coded per standard practices to assist in job site verification. It is suitable for use with soldered, brazed, or mechanically joined systems. Key Attributes: Material: Seamless copper tube, Type M Size: 1-1/4″ nominal ID, 1-3/8″ OD Length: 10 feet (straight hard drawn) Wall Thickness: 0.042″ Working Pressure: 582 psi Temperature Range: Rated for service from 100°F to 400°F Compliance: Meets ASTM B88 and NSF 61 standards; certified for potable water applications Performance & Application: Rigid Construction – Type M copper is suitable for interior plumbing, hydronic distribution lines, and general water supply systems where code permits. Corrosion Resistance – Copper material provides excellent resistance to scaling and degradation in potable water environments. Pressure Rated – Designed for continuous operation under pressure in residential and commercial systems up to 582 psi. Code-Compliant – Manufactured to meet North American plumbing codes when installed according to standard procedures. Installation Notes: Cutting and joining Type M copper tubing requires proper tooling and attention to standard techniques. Hard temper tubing must be cut to length and joined using solder, brazing, or approved press-fit fittings. It is not intended for underground burial unless otherwise protected per local code.

Specifications

Specifications Weight 6.820000 Length (inches) 8.88 Width (inches) 1.25 Height (inches) 8.88 Item Type Copper Tubing Brand Non-Specified Brand Form Straight Line Set Insulation Type Single Line Insulated Manufacturer Non Specified Manufacturer MPN MH12010 Max Pressure 582 psi Outside Diameter 1-3/8 in Pipe Wall Type Hard Sub Type Plumbing Water Tube Nominal Size 1-1/4 in Wall Thickness 0.042 in Material Copper Application Potable Water Item Returns This item can be returned

Buying Information

Confirm model MH12010 and the listed specifications against the existing component before ordering.

Brand

Non-Specified Brand

MPN

MH12010

0
Scroll to Top