1-1/4” PVC 45° DWV Elbow – Hub x Hub Fitting for Drainage Applications
The1-1/4” PVC 45° DWV Elbowis engineered for use in non-pressurized drainage, waste, and vent (DWV) systems. Its 45-degree sweep provides a smooth directional change, reducing the potential for flow restrictions and promoting efficient waste movement throughout the system. Manufactured to industry dimensional standards, this elbow ensures secure solvent-weld connections with compatible piping.
Constructed from durable polyvinyl chloride, the fitting is resistant to corrosion, scaling, and common chemical exposures encountered in DWV service. It is designed for gravity flow applications and intended for installation in both vertical and horizontal runs where gentle directional transitions are required to maintain system performance.
Product Specifications
- MaterialPVC (polyvinyl chloride)
- Nominal Size1-1/4 inch
- Connection TypeHub x Hub (solvent weld)
- Fitting Angle45 degrees
- ComplianceASTM D2665, NSF 14 certified for DWV use
Performance Features
- ✅Solvent-Weld Socket EndsProvide a leak-resistant mechanical bond when used with standard primer and cement
- ✅Chemical and Corrosion ResistanceSuitable for sanitary waste systems and resistant to household and industrial discharge
- ✅Low-Profile SweepReduces pressure drop compared to sharper angle fittings, maintaining effective drainage velocity
- ✅Non-Metallic ConstructionEliminates risk of galvanic corrosion when installed with dissimilar piping materials
- ✅Precision MoldedDimensional tolerance supports proper pipe alignment and smooth assembly
Installation Guidelines
Clean and dry all contact surfaces before applying primer and solvent cement. Insert pipe fully into the hub socket and hold until set to ensure alignment. Allow for full cure time per manufacturer instructions before pressure or flow is introduced. This fitting is not suitable for pressurized systems and should only be used in gravity-flow DWV applications.
Common Applications
The 1-1/4” 45-degree PVC elbow is frequently installed in branch lines, fixture arms, and horizontal offsets within DWV systems. It is used in both new construction and retrofits in residential, multi-family, and light commercial buildings, especially in configurations requiring gradual directional changes to meet code or structural constraints.
Did You Know?
45° DWV fittings are preferred over 90° fittings in many lateral drain transitions to reduce the risk of blockages and support system efficiency. Their use also often aligns with plumbing code mandates for minimizing directional flow resistance.
The1-1/4” PVC 45° DWV Elbowoffers a dependable solution for sanitary drainage layouts requiring directional adjustment with minimal flow restriction. Its performance characteristics and compatibility with standard piping materials make it a reliable choice for code-compliant system design.




