Skip to content
Need help identifying a part? Contact parts support
SKU: 69462Brand: Campbell
,

1-1/4 inch PVC 90 Degree Insert Elbow Insert x Male

$2.09

1-1/4” PVC Insert 90° Elbow – Barbed Fitting for Polyethylene Pipe Transitions The 1-1/4 inch PVC 90 Degree Insert Elbow is a barbed fitting designed for use with flexible polyethylene (PE) tubing in cold water and irrigation systems.

Quantity
SKU: 69462 Categories: ,

1-1/4” PVC Insert 90° Elbow – Barbed Fitting for Polyethylene Pipe Transitions

The1-1/4 inch PVC 90 Degree Insert Elbowis a barbed fitting designed for use with flexible polyethylene (PE) tubing in cold water and irrigation systems. This fitting allows for a 90-degree directional change while maintaining full bore flow, minimizing the risk of kinking or flow restriction at the turn.

Constructed from Type I, Grade I polyvinyl chloride as defined by ASTM D1784, this elbow is compatible with cold-water distribution lines where mechanical insert connections are specified. Barbed ends offer reliable mechanical retention when secured with stainless steel hose clamps.

Key Features

  • ✅Nominal Size1-1/4 inch insert x insert
  • ✅Connection TypeInsert/barbed ends for flexible PE pipe
  • ✅MaterialInjection-molded PVC (typically Schedule 80 or equivalent wall thickness)
  • ✅Pressure RatingUp to 100 PSI at 73°F (varies by pipe and clamp type)
  • ✅ComplianceMay conform to ASTM D2609 for plastic insert fittings; NSF 14/61 certified when marked accordingly

Installation Requirements

Install by pushing the barbed ends into compatible polyethylene tubing and securing with corrosion-resistant hose clamps. No solvent cement is required. Ensure pipe is cut cleanly and inserted fully past all barbs to avoid pullout under system pressure. Avoid excessive bending stress at the elbow to maintain joint integrity.

Common Applications

Used in residential and commercial cold-water systems including landscape irrigation, water service lines, well pump hook-ups, and agricultural piping installations. Suitable for both buried and above-ground systems where flexibility and corrosion resistance are required.

Material Consideration

PVC insert fittings provide strong resistance to chemical exposure, abrasion, and UV degradation. Not intended for use with hot water, pressurized air or gas systems, or for use with rigid piping types such as copper or CPVC.

Specifications

Specifications Weight 0.380000 Brand Campbell ADA Compliance No Angle 90 Deg Length (inches) 6.25 Width (inches) 7.55 Height (inches) 4.05 End Style Insert x Male Side A 1-1/4″ Side B 1-1/4″ Fitting Type Elbows Item Type Fittings Manufacturer Baker Water Systems, Inc MPN CEP5 Material PVC Product Family Fittings Item Returns This item can be returned

Buying Information

Match CEP5 to the existing configuration and specifications before ordering

Brand

Campbell

MPN

CEP5

0
Scroll to Top