Skip to content
Need help identifying a part? Contact parts support
SKU: 1946440Brand: Non-Specified Brand
,

1-1/4 inch x 1 inch Brass Reducing Coupling Female x Female

$7.14

1-1/4 inch x 1 inch Lead-Free Brass Reducing Coupling – Compliant Transition Fitting for Potable Water Systems The 1-1/4 inch x 1 inch lead-free reducing coupling is a threaded brass fitting used to transition between different nominal pipe sizes in potable water and mechanical sy…

Quantity
SKU: 1946440 Categories: ,

1-1/4 inch x 1 inch Lead-Free Brass Reducing Coupling – Compliant Transition Fitting for Potable Water Systems

The 1-1/4 inch x 1 inch lead-free reducing coupling is a threaded brass fitting used to transition between different nominal pipe sizes in potable water and mechanical systems. Constructed from certified low-lead brass, this fitting is designed for systems where compliance with the Safe Drinking Water Act (SDWA) and related regulations is required.

Featuring female National Pipe Thread (NPT) ends, the coupling supports direct connection between male-threaded components in copper, CPVC, or steel piping systems. Precision-machined threads ensure reliable engagement and pressure sealing when used with appropriate thread sealant.

Product Specifications

  • MaterialLead-free brass (≤0.25% weighted lead content)
  • Nominal Sizes1-1/4 inch x 1 inch
  • Connection TypeFemale NPT x Female NPT
  • ComplianceNSF/ANSI 61 and 372 certified for potable water systems

Performance Characteristics

  • ✅Lead-Free CertifiedSuitable for drinking water applications as mandated by federal and state law
  • ✅Dimensional ConsistencyManufactured to ANSI B1.20.1 standards for NPT fittings
  • ✅Thread IntegrityMachined for smooth engagement, minimizing risk of cross-threading or seal failure
  • ✅Corrosion ResistanceBrass composition offers long service life in potable and non-potable water systems
  • ✅Pressure RatingRated for typical residential and commercial system pressures (verify per system design)

Installation Considerations

Apply an approved PTFE thread sealant or pipe compound prior to assembly. Use two properly sized wrenches—one to stabilize the body of the fitting and one to tighten the adjoining pipe—to avoid deformation. Over-tightening should be avoided to preserve thread integrity and sealing surfaces.

Typical Applications

The 1-1/4 inch x 1 inch brass reducing coupling is commonly used in

  • Potable water supply systems (cold and hot)
  • Mechanical piping networks requiring size transitions
  • Manifold connections and water heater tie-ins
  • Hydronic heating systems using threaded brass components

Regulatory Note

All fittings used in potable water systems must comply with NSF/ANSI 61 (Health Effects) and NSF/ANSI 372 (Lead Content). This coupling meets both standards and is suitable for use in public and private water distribution systems.

The 1-1/4 inch x 1 inch lead-free reducing coupling provides a reliable and compliant solution for transitioning between pipe sizes in water supply systems. Its brass construction ensures mechanical strength and chemical resistance across a variety of installation environments.

Specifications

Specifications Weight 0.470000 Brand Non-Specified Brand ADA Compliance No Length (inches) 1.9 Width (inches) 1.9 Height (inches) 1.75 End Style Female x Female Side A 1-1/4″ Side B 1″ Fitting Type Coupling Item Type Fittings Manufacturer Non Specified Manufacturer MPN B-RC0605LF Material Brass Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

B-RC0605LF

0
Scroll to Top