Skip to content
Need help identifying a part? Contact parts support
SKU: 6360Brand: Non-Specified Brand
,

1-1/4 inch x 18 inch Galvanized Steel Nipple

$3.92

1-1/4″ x 18″ Galvanized Steel Nipple – Threaded Pipe Connector for Industrial and Mechanical Systems The 1-1/4″ x 18″ Galvanized Steel Nipple is a straight pipe section with male National Pipe Thread (NPT) ends, fabricated to facilitate inline connections between compatible thread…

Quantity

1-1/4″ x 18″ Galvanized Steel Nipple – Threaded Pipe Connector for Industrial and Mechanical Systems

The1-1/4″ x 18″ Galvanized Steel Nippleis a straight pipe section with male National Pipe Thread (NPT) ends, fabricated to facilitate inline connections between compatible threaded components in mechanical, plumbing, and hydronic systems. Manufactured to ASTM A53/A733 standards, this nipple is suitable for applications involving potable water (when approved), low-pressure steam, oil, or air systems.

Hot-dip galvanization provides an external zinc coating that enhances corrosion resistance in non-submerged environments. The fitting is machined to ensure thread accuracy and pressure-tight sealing when installed using appropriate joining methods such as PTFE thread seal tape or pipe joint compound.

Product Highlights

  • ✅ASTM-Compliant Fabrication– Constructed to meet dimensional and material specifications per ASTM A733 (nipple standard) and A53 (pipe specification).
  • ✅Hot-Dip Galvanized– Provides a zinc barrier layer against oxidation and environmental exposure, extending service life in above-ground installations.
  • ✅Threaded NPT Ends– ANSI B1.20.1 standard threading ensures compatibility with other Schedule 40 steel or galvanized fittings.
  • ✅Schedule 40 Wall Thickness– Suitable for moderate pressure requirements typical of water and air handling systems.
  • ✅Uniform Length– 18-inch overall length for use in extended reach pipe runs or spacing requirements.

Recommended Applications

This galvanized steel nipple is commonly used in

  • Potable and non-potable water systems (verify local code approval)
  • Low-pressure compressed air networks
  • Cooling tower and HVAC loop installations
  • General mechanical and piping support frameworks

Installation Notes

To ensure system integrity

  • Use pipe wrenches or chain tongs suitable for galvanized materials.
  • Apply thread sealant compatible with the service medium (oil, water, or air).
  • Avoid over-torque to reduce thread deformation or stress cracking of mating components.

Specifications

  • Nominal Pipe Size1-1/4 inch
  • Length18 inches
  • Thread TypeNPT – ANSI B1.20.1
  • MaterialCarbon steel, hot-dip galvanized per ASTM A123
  • Wall ThicknessSchedule 40

This fitting meets the structural and mechanical demands of professional installations where a corrosion-resistant threaded extension is required. It is not suitable for underground burial without further protection or for high-temperature steam service. Always verify compatibility with fluid media and local code requirements prior to installation.

Specifications

Specifications Weight 3.420000 Brand Non-Specified Brand ADA Compliance No Length (inches) 18 Width (inches) 1.66 Height (inches) 1.66 Side A 1-1/4″ Side B 18″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN 566-180HC Material Galvanized Steel Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size and threaded connection details for MPN 566-180HC before ordering.

Brand

Non-Specified Brand

MPN

566-180HC

0
Scroll to Top