1-1/4 inch x 3/4 inch Copper Reducing Coupling – Sweat Connection for Pressure Systems
The 1-1/4 inch x 3/4 inch Copper Reducing Coupling is designed to provide a secure transition between copper tubing of different diameters in potable water, hydronic heating, or other pressure-rated applications. Manufactured from wrought copper to meet ASTM B75 or B88 standards, this coupling delivers consistent fit and long-term system integrity.
Technical Specifications
- MaterialWrought copper (lead-free, NSF/ANSI 61 certified)
- SizeReduces from 1-1/4 inch to 3/4 inch nominal copper tube size (CTS)
- ConnectionC x C (sweat solder connection, requires soldering)
- Pressure RatingSuitable for systems up to 200 psi (depending on system design and solder method)
- Applicable StandardsASME B16.22, NSF/ANSI 61, ASTM B88
Key Features
- Reliable Flow TransitionReduces pipe size while maintaining internal system pressure and volume control.
- Solder Joint CompatibilityDesigned for use with standard soldering techniques using approved flux and lead-free solder.
- Corrosion ResistanceCopper’s natural corrosion-resistant properties make this fitting well suited for domestic water and closed-loop heating systems.
- Code CompliantManufactured to comply with IPC, UPC, and local mechanical and plumbing codes for potable systems.
Common Applications
This reducing coupling is used in new construction and retrofit work for branch lines and system modifications. Common placements include
- Water distribution systems (hot and cold)
- Hydronic heating loops and boiler feeds
- Chilled water or HVAC circuits
- Transition points in multi-zone manifold assemblies
Installation Guidelines
Installers should follow best practices for sweat-soldered copper systems
- Deburr and clean both tubing and fitting surfaces thoroughly before assembly
- Apply approved lead-free flux to mating surfaces
- Use uniform heat with a torch; allow solder to draw fully into the joint
- Cool naturally and clean the joint area after installation
Always inspect joints for full solder coverage. Pressure testing should follow manufacturer and code guidance prior to system use.
Additional Insight
Under recent national plumbing codes, all copper fittings in potable water systems must be lead-free (defined as ≤0.25% lead content). This coupling complies with Safe Drinking Water Act requirements and is approved for use across jurisdictions in North America.
Use of precision-formed copper reducing couplings improves reliability in variable-size branch transitions and reduces flow turbulence at pipe reductions. For installations requiring high thermal conductivity and pressure containment, copper remains the material of choice for professionals.
Specifications
Buying Information
Confirm the listed size and connection details for MPN W 01058 before ordering.




