Skip to content
Need help identifying a part? Contact parts support
SKU: 1903828Brand: Non-Specified Brand
,

1-1/4 inch x 3/4 inch Galvanized Iron Reducing Tee Female x Female x Female

$2.20

1-1/4 inch x 3/4 inch Galvanized Iron Reducing Tee – FNPT Threaded Fitting for Pipe Branching The 1-1/4 inch x 3/4 inch Galvanized Iron Reducing Tee is a malleable iron fitting designed for pipe branching in threaded piping systems.

Quantity
SKU: 1903828 Categories: ,

1-1/4 inch x 3/4 inch Galvanized Iron Reducing Tee – FNPT Threaded Fitting for Pipe Branching

The 1-1/4 inch x 3/4 inch Galvanized Iron Reducing Tee is a malleable iron fitting designed for pipe branching in threaded piping systems. This tee features three female NPT connections and allows for a smooth reduction from a 1-1/4 inch run to a 3/4 inch branch, making it suitable for general utility, air, water, gas, or low-pressure steam lines.

Manufactured to conform with ANSI/ASME B16.3 standards and hot-dip galvanized per ASTM A153, this fitting provides resistance to corrosion and long-term durability. It is used in both commercial and residential systems where galvanized iron piping is specified and a size transition is required at a branch junction.

Performance Features

  • Cast Malleable Iron BodyProvides excellent mechanical strength and impact resistance for structural reliability in high-demand environments.
  • Hot-Dip Galvanized CoatingEnhances corrosion resistance, especially in environments with moisture or outdoor exposure.
  • National Pipe Thread (NPT)Standard tapered threads for secure, pressure-rated connections with pipe sealant or Teflon tape.
  • Pressure RatingSuitable for up to 300 PSI non-shock for air, oil, or water; and 150 PSI for saturated steam service.

Specifications

  • MaterialASTM A197 malleable iron
  • FinishZinc-coated via hot-dip galvanization
  • End ConnectionsFNPT x FNPT x FNPT
  • Dimensions1-1/4” run, 3/4” branch
  • StandardsASME B16.3; coating per ASTM A153

Typical Applications

Used to connect and reduce branch pipe size in

  • Potable and non-potable water distribution systems
  • Low-pressure steam or condensate lines
  • Compressed air systems
  • Natural gas or LP piping (where approved)

Installation Guidance

Use pipe thread compound or PTFE tape on male threads. Tighten with hand torque initially, then complete with a wrench while supporting the fitting to prevent deformation. Avoid overtightening to preserve thread integrity and fitting structure.

Note

This fitting is intended for use in non-corrosive or moderately corrosive applications and is not recommended for underground installation unless protected against soil contact and corrosion.

The 1-1/4 inch x 3/4 inch Galvanized Iron Reducing Tee is a pressure-rated solution designed for consistent mechanical performance in multi-branch systems. Its corrosion resistance, dimensional accuracy, and code compliance make it a reliable component for any threaded piping assembly.

Specifications

Specifications Weight 0.500000 Brand Non-Specified Brand ADA Compliance No Length (inches) 1.25 Width (inches) 1.25 Height (inches) 0.75 End Style Female x Female x Female Side A 1-1/4″ Side B 1-1/4″ Side C 3/4″ Fitting Type Tees Item Type Fittings Manufacturer Non Specified Manufacturer MPN 510-664 Material Galvanized Iron Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

510-664

0
Scroll to Top