Skip to content
Need help identifying a part? Contact parts support
SKU: 1991033Brand: Apollo PowerPress
,

1/2 inch Carbon Steel 417G Gas Press Cap

$6.20

Apollo PowerPress 1/2″ Carbon Steel Gas Press Cap – Model 417G The 1/2 inch Carbon Steel 417G Gas Press Cap is designed to terminate unused press connections in fuel gas piping systems. Manufactured from carbon steel and engineered for use in conjunction with press-fit carbon stee…

Quantity
SKU: 1991033 Categories: ,

Apollo PowerPress

1/2″ Carbon Steel Gas Press Cap – Model 417G

The1/2 inch Carbon Steel 417G Gas Press Capis designed to terminate unused press connections in fuel gas piping systems. Manufactured from carbon steel and engineered for use in conjunction with press-fit carbon steel piping components, this cap provides a permanent, flame-free method of sealing branch lines or system extensions.

Product Overview and Material Characteristics

This press cap features a cold-formed body with a factory-installed sealing element and defined press contour, compatible with standard carbon steel press systems. It is intended for use in natural gas and propane distribution within commercial and residential systems and meets relevant fuel gas system standards.

  • ✅Carbon Steel ConstructionFabricated from high-strength carbon steel conforming to ASTM specifications for gas distribution components.
  • ✅Press ConnectionPress-fit design eliminates the need for threading, welding, or soldering, enabling quick installation with approved press tools.
  • ✅Leak Detection CapabilityCompatible with tool-actuated leak detection features during system testing.
  • ✅Internal Sealing ElementTypically EPDM or HNBR depending on application type; rated for gas service conditions.

Technical Specifications

  • Size1/2 inch nominal
  • MaterialCarbon Steel
  • Connection TypePress (standard profile)
  • ApplicationFuel gas systems (natural gas, propane)
  • StandardsMeets ANSI LC-4 / CSA 6.32, ICC, and NFPA 54 requirements

Installation Notes

Install using manufacturer-recommended press tools and jaws specific to the system size and press profile. Ensure pipe is deburred and insertion depth is marked prior to pressing. No sealant or thread tape is required. Pressed joints should be pressure tested per local code. Not suitable for use in potable water or compressed air systems.

Typical Applications

The 417G press cap is used to terminate branch lines or unused outlets in fuel gas piping networks. It is frequently employed during phased construction, system modifications, or permanent sealing of unused ports in manifolds, appliance connections, or risers.

System Compatibility

Designed for integration with carbon steel press systems rated for fuel gas, this cap offers mechanical strength and leak-resistance in non-potable, high-pressure environments. Suitable for both above-ground and concealed installations as allowed by code.

The1/2″ Carbon Steel 417G Gas Press Capoffers a secure, fast-install solution for terminating press system ends in gas service piping. Engineered for compliance and repeatable performance, it supports contractor-grade reliability on job sites requiring code-compliant fuel gas solutions.

Specifications

Specifications Weight 0.240000 Brand Apollo PowerPress ADA Compliance No Length (inches) 1.38 Width (inches) 1.26 Height (inches) 1.26 Side A 1/2″ Fitting Type Caps Item Type Fittings Manufacturer Aalberts Integrated Piping Systems MPN PWR7482475 Material Carbon Steel Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed model and configuration against the application before ordering.

Brand

Apollo PowerPress

MPN

PWR7482475

0
Scroll to Top