Skip to content
Need help identifying a part? Contact parts support
SKU: 1950647Brand: Non-Specified Brand
,

1/2 inch Copper 90 Degree Elbow Copper x Female

$5.48

1/2 inch Copper 90° Elbow – Precision Formed for Directional Transitions The 1/2 inch Copper 90 Degree Elbow is a standard component in copper piping systems, providing a right-angle change in direction for pressurized and non-pressurized fluid transport.

Quantity
SKU: 1950647 Categories: ,

1/2 inch Copper 90° Elbow – Precision Formed for Directional Transitions

The1/2 inch Copper 90 Degree Elbowis a standard component in copper piping systems, providing a right-angle change in direction for pressurized and non-pressurized fluid transport. Formed from lead-free wrought copper, this fitting meets industry performance criteria for potable water and hydronic applications.

Designed for use with sweat (soldered) or press connections, this elbow supports clean system layout while minimizing flow disruption. It complies with applicable standards including NSF/ANSI 61 and ASME/ANSI B16.22, making it suitable for use in building plumbing systems governed by national and local codes.

Performance Attributes

  • ✅Wrought Copper ConstructionFabricated from lead-free copper (C12200 alloy) for compatibility with potable water systems.
  • ✅Sweat x Female ConfigurationProvides a transition between copper tubing and a threaded female component.
  • ✅Corrosion-Resistant SurfaceMaintains mechanical integrity in both hot and cold water systems.
  • ✅Compact RadiusDesigned for tight installation spaces while maintaining flow performance.
  • ✅Standards-CompliantListed under NSF 61 and complies with applicable plumbing and mechanical codes.

Installation Requirements

Proper installation requires standard pipe preparation, including cleaning, fluxing, and soldering using lead-free solder. Ensure that the fitting is fully seated and heated evenly to achieve a uniform solder joint. For threaded transitions, appropriate sealing methods (e.g., PTFE tape or approved sealant) should be applied to male threads prior to connection.

Product Specifications

  • MaterialLead-Free Copper Alloy (ASTM B75/B88)
  • Nominal Size1/2 inch
  • Connection TypeSweat x Female Thread
  • Operating PressureUp to 200 PSI (based on system design and installation method)
  • Temperature RatingSuitable for temperatures up to 400°F (soldered systems)

Common Applications

Used in domestic water distribution, HVAC piping, and hydronic heating loops. The 90° elbow configuration allows for efficient routing around structural obstacles and alignment within compact mechanical assemblies.

Code Compliance Note

Lead-free fittings are mandated in drinking water systems under the Safe Drinking Water Act. This component meets federal and state-level low-lead content requirements and is third-party certified for use in potable applications.

The1/2 inch Copper 90 Degree Elbowis a standard solution for directional changes in copper pipe systems. Its precise construction and code-compliant design support long-term reliability across commercial and residential installations.

Specifications

Specifications Weight 0.130000 Brand Non-Specified Brand ADA Compliance No Angle 90 Deg Length (inches) 0.95 Width (inches) 1.45 Height (inches) 1.2 End Style Copper x Female Side A 1/2″ Side B 1/2″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN A 01507NL Material Copper Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the 1/2 inch configuration, copper material, angle and copper x female ends before ordering.

Brand

Non-Specified Brand

MPN

A 01507NL

0
Scroll to Top