1/2 inch Galvanized Malleable Iron Union – Threaded Fitting for Serviceable Pipe Connections
The 1/2 inch galvanized malleable iron union is a three-piece fitting used to join sections of threaded pipe while allowing for future disassembly without cutting. Commonly used in water, air, gas, and low-pressure steam systems, this union enables secure and serviceable connections where maintenance access or future reconfiguration is required.
Constructed from malleable cast iron and hot-dip galvanized for corrosion protection, the union features NPT female threads and a central seating surface with ground joint or flat face design, depending on specification. This allows for reliable sealing under appropriate torque and thread engagement.
Specifications
- MaterialHot-dip galvanized malleable iron (ASTM A197/A153)
- Size1/2 inch nominal pipe size (NPS)
- Thread TypeANSI B1.20.1 (NPT), Female x Female
- Design3-piece union with hex nut and seating face
- Pressure RatingUp to 150 psi for water/oil/air (WOG); confirm per manufacturer’s data sheet
- ComplianceMeets ASME B16.39 standards for threaded malleable fittings
Typical Applications
- Potable and non-potable water distribution systems (aboveground only)
- Low-pressure steam and condensate return piping
- Compressed air and inert gas lines
- Plumbing installations requiring future disassembly or equipment service
Installation Guidance
This union should be installed using a suitable thread sealant or PTFE tape on both threaded ends. Ensure proper pipe alignment before final tightening to prevent cross-threading or gasket misalignment. For ground joint unions, a machined conical seat provides metal-to-metal sealing; flat face designs may include a gasket.
Environmental Considerations
Galvanized iron fittings are suitable for indoor, dry, or mildly corrosive environments. They are not recommended for direct burial, aggressive chemical exposure, or high-temperature service without additional protection or alternative materials (e.g., stainless steel or brass).
Summary
The 1/2 inch galvanized iron union provides a durable, field-serviceable connection in threaded piping systems. Its corrosion-resistant coating and mechanical design make it well-suited for installations where access and future maintenance are required.




