Skip to content
Need help identifying a part? Contact parts support
SKU: 4836Brand: Non-Specified Brand
,

1/2″ ID x 10′ Copper Tubing, Straight Hard, Type L

$9.96

Streamline LH04010 Type L Hard Copper Tube – 1/2″ x 10 ft The Streamline LH04010 is a hard-drawn Type L copper tube manufactured for pressure-rated plumbing, hydronic, and HVAC piping systems. Constructed from seamless UNS C12200 copper, this 10-foot straight length tube provides…

Quantity
SKU: 4836 Categories: ,

Streamline LH04010 Type L Hard Copper Tube – 1/2″ x 10 ft

The Streamline LH04010 is a hard-drawn Type L copper tube manufactured for pressure-rated plumbing, hydronic, and HVAC piping systems. Constructed from seamless UNS C12200 copper, this 10-foot straight length tube provides consistent dimensional integrity, corrosion resistance, and mechanical strength for applications involving potable water, heating, cooling, and general service piping. The medium wall Type L designation ensures balanced performance between strength and formability, suitable for both residential and commercial installations requiring compliance with ASTM B88 standards.

Details

  • ManufacturerStreamline (Mueller Industries)
  • Model NumberLH04010
  • Product TypeType L Hard Copper Tube
  • FormHard-drawn, straight length
  • Nominal Size1/2 inch
  • Outside Diameter5/8 inch (0.625 in / 15.88 mm)
  • Wall Thickness0.040 inch (1.02 mm)
  • Length10 feet (3.05 meters)
  • MaterialSeamless Copper – UNS C12200 (phosphorus-deoxidized, non-arsenical)
  • Tube TypeType L (medium wall)
  • TemperHard-drawn (rigid)
  • Manufacturing StandardASTM B88 – Seamless Copper Water Tube
  • Working Pressure (at 100°F)722 psi
  • Maximum Service Temperature400°F (204°C)
  • Service ClassificationRated for pressure and non-pressure applications
  • FinishCleaned, capped, and ready for joining
  • Applicable Joining MethodsSoldering, brazing, press-connect, or compression fittings
  • ComplianceMeets ASTM B88 and NSF/ANSI 61 (for potable water applications)
  • Country of ManufactureUSA

Technical Application

The Streamline LH04010 Type L hard copper tube is used in mechanical and plumbing systems requiring reliable pressure containment and dimensional stability. The medium wall thickness accommodates both hot and cold water service, as well as hydronic heating and chilled water systems. The hard temper allows for direct straight-line installation with minimal support deflection, while its composition ensures compatibility with soldered and brazed joints under code-compliant conditions. Type L tubing provides optimal durability and internal surface smoothness for efficient fluid conveyance in HVAC and plumbing circuits. It is suitable for use in both above-ground and concealed installations where code-approved copper piping is specified.

Specifications

  • Tube TypeType L – Medium Wall
  • TemperHard-Drawn (Rigid)
  • Nominal Size1/2 inch
  • Outside Diameter5/8 inch (0.625 in)
  • Wall Thickness0.040 inch (1.02 mm)
  • Length10 feet (3.05 meters)
  • Material GradeUNS C12200 Copper
  • Manufacturing ProcessSeamless Drawn Tube
  • Pressure Rating (at 100°F)722 psi
  • Service Temperature RangeUp to 400°F (204°C)
  • Applicable StandardsASTM B88, NSF/ANSI 61
  • Joining MethodsSoldering, Brazing, Press-Connect, Flare, or Compression Fittings
  • Corrosion ResistanceExcellent – suitable for potable and hydronic systems
  • Use CategoryPressure-rated piping for plumbing, hydronic, and HVAC systems

Application Suitability

  • Potable water distribution systems
  • Hydronic heating and cooling loops
  • Chilled water circuits and refrigeration applications
  • HVAC piping and mechanical service systems
  • General construction requiring rigid copper piping

Installation Considerations

Installation should be performed by qualified personnel using approved copper joining techniques in accordance with ASTM B828 and local mechanical code requirements. Proper alignment, tube cleaning, and support spacing should be maintained to prevent mechanical stress and ensure long-term system reliability. When brazing or soldering, compatible filler metals and fluxes should be selected based on service temperature and medium.

Summary

The Streamline LH04010 Type L Hard Copper Tube (1/2″ x 10 ft) provides a high-integrity, pressure-rated solution for professional HVAC, hydronic, and plumbing systems. Manufactured from seamless C12200 copper to ASTM B88 standards, it offers rigidity, corrosion resistance, and mechanical strength suitable for potable water and mechanical piping applications. Its medium wall construction and hard temper make it ideal for code-compliant installations requiring long service life and dimensional stability.

Specifications

Specifications Weight 2.850000 Length (inches) 8.88 Width (inches) 5 Height (inches) 8.88 Item Type Copper Tubing Brand Non-Specified Brand Form Straight Line Set Insulation Type Single Line Insulated Manufacturer Non Specified Manufacturer MPN LH04010 Max Pressure 722 psi Outside Diameter 5/8 in Pipe Wall Type Hard Sub Type Plumbing Water Tube Nominal Size 1/2 in Wall Thickness 0.04 in Material Copper Application Potable Water Item Returns This item can be returned

Buying Information

Confirm model LH04010 and the listed specifications against the existing component before ordering.

Brand

Non-Specified Brand

MPN

LH04010

0
Scroll to Top