Skip to content
Need help identifying a part? Contact parts support
SKU: 2033872Brand: Boshart
,

1/2 inch PEX Stainless Steel Insert Tee PEX x PEX x PEX

$0.97

1/2 inch PEX Stainless Steel Insert Tee – Triple Barb Fitting for Branch and Supply Connections The 1/2 inch stainless steel PEX insert tee is a triple-barbed fitting used to connect three 1/2 inch PEX lines in a T-configuration.

Quantity
SKU: 2033872 Categories: ,

1/2 inch PEX Stainless Steel Insert Tee – Triple Barb Fitting for Branch and Supply Connections

The 1/2 inch stainless steel PEX insert tee is a triple-barbed fitting used to connect three 1/2 inch PEX lines in a T-configuration. It is engineered for use in pressurized potable water and hydronic systems, enabling branch line distribution from a main supply or interconnection between circuits.

Technical Specifications

  • Material304 stainless steel for enhanced corrosion resistance and mechanical durability
  • Connection Type1/2 inch PEX barb x 1/2 inch PEX barb x 1/2 inch PEX barb
  • CompatibilityDesigned for use with ASTM F1807 or F2098 crimp/clamp PEX connection systems
  • Working PressureRated up to 200 PSI at 73°F; operating range suitable up to 200°F
  • CertificationLead-free, conforms with NSF/ANSI 61 and 372 standards for potable water applications

Application

Used to branch off main distribution lines or connect intersecting runs, this fitting is typically installed in residential and light commercial plumbing systems. Suitable for hot and cold water applications, radiant heating loops, and zone control circuits.

Installation Notes

Install using standard crimp or clamp ring tools approved for PEX systems. Ensure tubing is cut cleanly and squarely, then insert fully onto each barb connection before securing with the appropriate ring. Pressure test system after installation to verify connection integrity. No thread sealant or plumber’s tape is required, as this is a mechanical insert fitting.

Performance Consideration

Stainless steel fittings are preferred in environments with aggressive water chemistry or where dezincification of brass may occur. Their high tensile strength and resistance to thermal stress make them suitable for long-term performance under varying system demands.

Specifications

Specifications Weight 0.030000 Brand Boshart ADA Compliance No Length (inches) 0.88 Width (inches) 0.88 Height (inches) 0.88 End Style PEX x PEX x PEX Side A 1/2″ Side B 1/2″ Side C 1/2″ Fitting Type PEX Fittings Item Type Fittings Manufacturer Boshart Industries MPN SSPEX-T05 Material Stainless Steel Product Family Fittings Temperature Rating Up to 400 Deg F Item Returns This item can be returned

Buying Information

Match SSPEX-T05 to the existing component before ordering.

Brand

Boshart

MPN

SSPEX-T05

0
Scroll to Top