Skip to content
Need help identifying a part? Contact parts support
SKU: 1996905Brand: Taco
,

1″ 2-Way Zone Sentry Press-Zone Valve, Normally Closed

$45.77

Taco Z100P2-1 Zone Sentry® Valve – 1″ Press, 2-Way NC, 24V Zone Valve for Hydronic Heating The Taco Z100P2-1 is a 1″ press-connect, two-way normally closed zone valve designed for use in closed-loop hydronic systems.

Quantity

Taco Z100P2-1 Zone Sentry® Valve – 1″ Press, 2-Way NC, 24V Zone Valve for Hydronic Heating

TheTaco Z100P2-1is a 1″ press-connect, two-way normally closed zone valve designed for use in closed-loop hydronic systems. Engineered for precision control and reduced power consumption, it integrates a microcircuit-controlled, gear-driven actuator to provide reliable, low-energy on/off flow control in a wide range of heating system applications.

This model supports 24V control signals and is compatible with standard 24V thermostats and relay panels. The Z100P2-1 is suitable for baseboard, radiant, fan coil, air handler, and panel radiator systems. It is designed for vertical or horizontal orientation and allows up to 12 valves to be powered by a 40VA transformer (subject to total VA load).

Key Features

  • Microcircuit LogicElectronic control for low power draw and accurate valve positioning
  • Gear-Driven ActuatorQuiet, high-torque motor delivers reliable on/off control
  • Manual OverrideIntegrated lever for manual operation during commissioning or servicing
  • Press-Fit Connection1″ press ends for copper tubing installations using standard press tools
  • Visual Position IndicatorAllows confirmation of valve status at a glance
  • Diagnostic LEDMulti-function indicator provides feedback on operation and fault status
  • Low VA DrawUp to 12 Zone Sentry valves can operate on a single 40VA transformer

Technical Specifications

  • ModelZ100P2-1
  • Connection Type1″ press
  • Valve Type2-way, normally closed
  • Control Voltage24V AC
  • ApplicationClosed-loop hydronic systems only (not for potable water)
  • Pressure RatingSuitable for standard hydronic pressures (up to 300 psi static)
  • Max Ambient Temperature120°F

Installation Guidelines

Installation of the Z100P2-1 requires standard press tools and a compatible 24V control system. The actuator is replaceable without draining the system. For optimal results, installation should be performed by a licensed HVAC or hydronic professional. Wiring must comply with local electrical codes and system VA limitations should be observed when connecting multiple valves to a transformer.

Contractor Notes

The Taco Z100P2-1 is designed with the installer in mind. The actuator mounts to the valve body without the need for linkages or gear calibration. It ships in the closed position and includes a manual open lever for purging. The valve body and actuator assembly are rated for long service life under typical hydronic load cycling.

Specifications

Specifications Weight 2.230000 Length (inches) 7.3 Width (inches) 4.6 Height (inches) 2.7 Item Type Zone Valves & Controls Brand Taco Manufacturer TACO Comfort Solutions MPN Z100P2-1 Sub Type Zone Valve Amperage Rating 0.48 A Connection Type Press End Style Closed Nominal Size 1 in Pressure Rating 300 PSI Application Zoning Primary Voltage 24 V Item Returns This item can be returned

Buying Information

Verify the model, connection, dimensions, and application details against the source listing before ordering.

Brand

Taco

MPN

Z100P2-1

0
Scroll to Top