Skip to content
Need help identifying a part? Contact parts support
SKU: 1988682Brand: Sioux Chief
,

1/2 inch x 12 inch PEX Copper Stub Out Crimp x Copper

$2.45

1/2″ PEX Stub Out – Rigid Copper Support for Termination Points The Sioux Chief 1/2″ PEX Stub Out is designed to provide a transition point from flexible PEX tubing to a fixed outlet location, typically at fixture rough-ins.

Quantity
SKU: 1988682 Categories: ,

1/2″ PEX Stub Out – Rigid Copper Support for Termination Points

The Sioux Chief 1/2″ PEX Stub Out is designed to provide a transition point from flexible PEX tubing to a fixed outlet location, typically at fixture rough-ins. It features a rigid copper tube segment mechanically attached to a PEX connection fitting, allowing for stable protrusion through framing while maintaining system integrity.

This stub out assembly is used in conjunction with PEX-a, PEX-b, or PEX-c tubing systems and supports secure termination for lavatory, toilet, or other plumbing fixture supply lines. The product is manufactured to meet ASTM and UPC requirements for residential and commercial potable water systems.

Technical Specifications

  • MaterialLead-free copper stub with factory-assembled PEX fitting (usually ASTM F1807, F2159, or F1960 compatible depending on configuration)
  • Nominal Stub Out Size1/2 inch (Copper OD)
  • Connection EndPEX barb or expansion fitting, depending on model
  • LengthVaries by SKU; commonly 6″, 8″, or 12″ projection
  • ComplianceCertified to NSF/ANSI 61 and ASTM F877 (PEX tubing compatibility)

Installation Guidelines

Secure the PEX stub out using appropriate brackets or clamps at the framing penetration. Connect the PEX end using approved crimp, clamp, or expansion methods, depending on the fitting type. Stub outs should be terminated with a cap or test plug for system pressure testing prior to fixture installation.

This product is intended for non-movable supply risers and is not designed to replace angle stops or shutoff valves. For code compliance, ensure use of support plates where pipe penetrates wall surfaces and maintain minimum spacing from potential heat sources or electrical interference.

Use Cases

Commonly installed behind walls in residential and light commercial buildings, especially at sinks, toilets, and ice maker outlets. Supports vertical or horizontal installation and is compatible with most standard rough-in boxes and stub out brackets.

System Integration Notes

Sioux Chief PEX stub outs maintain compatibility with major PEX system types (including Uponor, Viega, NIBCO, etc.) when matched with correct joining technology. Copper stub provides a secure transition from flexible tubing to fixed-point valves or outlets, reducing risk of pipe movement or connection stress at fixture interface points.

Code-Ready Fixture Stub for PEX Water Distribution

The 1/2″ PEX Stub Out by Sioux Chief provides a reliable, standardized method for terminating PEX water lines at fixture locations. Designed for strength, compliance, and long-term service in concealed wall installations.

Specifications

Specifications Weight 0.320000 Brand Sioux Chief ADA Compliance No Length (inches) 12 Width (inches) 2.2 Height (inches) 2.2 End Style Crimp x Copper Side A 1/2″ Side B 1/2″ Fitting Type PEX Fittings Item Type Fittings Manufacturer Sioux Chief Manufacutring Company, Inc. MPN 638X212E Material Copper Product Family Fittings Item Returns This item can be returned

Buying Information

Match 638X212E to the existing installation and source specifications before ordering

Brand

Sioux Chief

MPN

638X212E

0
Scroll to Top