Skip to content
Need help identifying a part? Contact parts support
SKU: 6193Brand: Non-Specified Brand
,

1/2 inch x 2-1/2 inch Chrome-Plated Brass Nipple

$4.37

1/2″ x 2-1/2″ Lead-Free Brass Nipple – MIP x MIP, Potable Water Rated The 1/2″ x 2-1/2″ Lead-Free Brass Nipple is a straight pipe fitting used to connect two female-threaded components in potable water, air, or non-corrosive fluid systems.

Quantity

1/2″ x 2-1/2″ Lead-Free Brass Nipple – MIP x MIP, Potable Water Rated

The 1/2″ x 2-1/2″ Lead-Free Brass Nipple is a straight pipe fitting used to connect two female-threaded components in potable water, air, or non-corrosive fluid systems. Featuring male National Pipe Tapered (NPT) threads on both ends, this fitting is precision-machined for secure engagement and pressure retention in both residential and commercial installations.

Manufactured from lead-free brass in compliance with NSF/ANSI 61 and 372, this nipple is approved for use in drinking water applications. It resists dezincification and corrosion under typical service conditions and is suitable for hot and cold water systems, including municipal water lines, pressure booster systems, and hydronic distribution loops.

Key Product Features

  • ✅MaterialLead-free brass (≤0.25% Pb), compliant with Safe Drinking Water Act
  • ✅Thread StandardANSI/ASME B1.20.1 NPT – ensures thread compatibility with standard fittings
  • ✅Size1/2″ nominal diameter, 2-1/2″ overall length
  • ✅Operating PressureSuitable for systems up to 200 PSI under typical water supply conditions
  • ✅Corrosion ResistanceBrass composition offers long-term resistance to scale, pitting, and mineral buildup

Installation Guidelines

Apply PTFE tape or thread sealant to male threads before insertion into mating fittings. Use a wrench on the flats to tighten, avoiding excessive torque to maintain thread integrity. Suitable for use in copper, CPVC, or PEX-to-metal transitions when installed with compatible adapters and fittings. All installations should comply with applicable plumbing codes and pressure guidelines.

Common Applications

This brass nipple is used in potable water systems, water heater connections, pressure tanks, irrigation setups, and general plumbing assemblies requiring short-span threaded connections. It supports use in new construction, repair work, and system modifications.

Compliance Note

Certified under NSF/ANSI 61 and 372, this fitting meets federal and state requirements for lead-free components in potable water systems. It is approved for use in jurisdictions adhering to SDWA mandates.

Technical Specifications

  • Nominal Size1/2″ x 2-1/2″
  • Connection TypeMIP x MIP (Male NPT Threads)
  • MaterialLead-Free Brass
  • CertificationsNSF/ANSI 61, NSF/ANSI 372, ASME B1.20.1 compliant

The 1/2″ x 2-1/2″ Lead-Free Brass Nipple offers a durable and code-compliant solution for short-length threaded transitions in potable water systems. Its dimensional accuracy and corrosion-resistant performance make it well-suited for pressure-rated plumbing applications.

Specifications

Specifications Weight 0.160000 Brand Non-Specified Brand ADA Compliance No Length (inches) 0.7 Width (inches) 0.8 Height (inches) 2.5 Side A 1/2″ Side B 2-1/2″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN NC03212 Material Chrome-Plated Brass Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size and threaded connection details for MPN NC03212 before ordering.

Brand

Non-Specified Brand

MPN

NC03212

0
Scroll to Top