Product Overview
The Everflow FTGC-YC12-24A Flexible Gas Connector is a stainless steel corrugated connector designed for secure gas supply connections in residential and light commercial applications. This assembly provides flexibility for alignment during installation while maintaining pressure integrity for both natural gas and LP gas systems. The connector includes factory-attached 1/2-inch MIP end fittings and a corrosion-resistant yellow polymer coating for identification and durability.
Technical Specifications
- ModelFTGC-YC12-24A
- ManufacturerEverflow
- Product TypeFlexible Gas Connector
- Connection Type1/2 in. MIP x 1/2 in. MIP
- Tube Outside Diameter5/8 inch
- Overall Length24 inches
- MaterialCorrugated stainless steel
- Protective CoatingYellow polymer jacket for corrosion resistance and line identification
- End FittingsFactory-installed machined brass or plated steel MIP fittings
- Operating PressureSuitable for standard residential and light commercial gas pressures
- Temperature RangeCompatible with typical appliance gas supply service temperatures
- ApplicationConnection of gas-fired appliances such as boilers, water heaters, furnaces, and unit heaters
- ComplianceCSA Certified; conforms to ANSI Z21.24 / CSA 6.10 standards for gas connectors
Professional Notes
Install in accordance with local fuel gas and mechanical codes. Do not stretch, kink, or conceal the connector within structural assemblies. Maintain adequate clearance from burners and flue surfaces. Verify full thread engagement on both fittings and test all joints using an approved leak detection method prior to commissioning.
Summary
The Everflow FTGC-YC12-24A Flexible Gas Connector is a 24-inch stainless steel corrugated connector with 1/2-inch MIP ends and a 5/8-inch OD. Designed for professional gas installations, it provides a code-compliant, corrosion-resistant connection for natural and LP gas systems.
Specifications
Buying Information
Confirm the FTGC-YC12-24A and listed product application before ordering.




