Skip to content
Need help identifying a part? Contact parts support
SKU: 1943869Brand: Sharkbite
,

3/4 inch x 1/2 Sharkbite Push Fitting Reducing Adapter for Water Heater Female x Push (Pack of 2)

$5.52

3/4″ x 1/2″ Push-to-Connect Reducing Adapter – Brass Fitting for Water Heater Transitions The 3/4 inch x 1/2 inch push-to-connect reducing adapter is a lead-free brass fitting designed to facilitate rapid transitions between dissimilar pipe sizes in pressurized water systems.

Quantity
SKU: 1943869 Categories: ,

3/4″ x 1/2″ Push-to-Connect Reducing Adapter – Brass Fitting for Water Heater Transitions

The 3/4 inch x 1/2 inch push-to-connect reducing adapter is a lead-free brass fitting designed to facilitate rapid transitions between dissimilar pipe sizes in pressurized water systems. It allows for direct connections between a 3/4 inch female threaded outlet and a 1/2 inch copper, CPVC, or PEX line without the use of solder, flux, or specialty tools.

Designed for Professional Use

This push-fitting adapter is manufactured to support high-efficiency installations in potable water systems, particularly in areas where flame-free or confined-space assembly is required. Key functional attributes include

  • ✅Push-Fit ConnectionAccepts copper, CPVC, or PEX tubing with standard insertion depth and internal gripping ring for secure hold.
  • ✅Threaded Transition3/4″ female NPT end suitable for direct connection to water heater nipples, valves, or threaded risers.
  • ✅Lead-Free BrassMeets NSF/ANSI 61 and 372 for potable water safety in residential and light commercial systems.
  • ✅Removable and ReusableCan be disconnected and reconnected using a release tool without degrading sealing integrity.
  • ✅No Flame RequiredEliminates the need for torches or heat application in finished areas or fire-restricted zones.

Installation Notes

Install by inserting the prepared pipe into the push-fit end until seated against the internal stop. Ensure pipe is clean, round, and free of burrs. Apply thread sealant or PTFE tape on the NPT threads as required by application. Follow applicable plumbing codes and torque specifications for threaded joints. Use a disconnect clip if rework is required after installation.

Product Specifications

  • MaterialLead-free brass body, EPDM O-ring, stainless steel grab ring
  • Connection Type3/4″ Female NPT x 1/2″ Push-to-Connect
  • Nominal Sizes3/4 inch x 1/2 inch
  • ApplicationPotable water, water heater connections, and retrofit installations
  • Pack Size2 units per package

System Applications

This adapter is frequently used in water heater installations, transition points in service lines, and situations where pipe diameter changes are required without system disassembly. Compatible with ASTM B88 (copper), ASTM D2846 (CPVC), and ASTM F876 (PEX) tubing standards.

Performance and Compliance

Certified for use in potable water systems and manufactured to meet mechanical performance standards under working pressures up to 200 psi and temperatures up to 200°F. Suitable for both horizontal and vertical installations.

The 3/4″ x 1/2″ push-to-connect reducing adapter delivers a quick, code-compliant solution for dimensional transitions in pressure-rated water systems. Built for field efficiency and system durability without the need for soldering or mechanical unions.

Specifications

Specifications Weight 0.450000 Length (inches) 5 Width (inches) 9 Height (inches) 5 Item Type Adapters Brand Sharkbite Manufacturer Reliance (Cash Acme) Worldwide Corporation MPN 22604LF Material Brass Item Returns This item can be returned

Buying Information

Verify the model, application, and listed specifications before ordering.

Brand

Sharkbite

MPN

22604LF

0
Scroll to Top