Skip to content
Need help identifying a part? Contact parts support
SKU: 6287Brand: Non-Specified Brand
,

1/2 inch x 48 inch Galvanized Steel Nipple

$4.54

1/2″ x 48″ Galvanized Steel Nipple – Designed for Extended Reach and Corrosion Resistance The 1/2″ x 48″ Galvanized Steel Nipple is manufactured for use in systems requiring long-span connections in water, air, or gas distribution piping.

Quantity

1/2″ x 48″ Galvanized Steel Nipple – Designed for Extended Reach and Corrosion Resistance

The1/2″ x 48″ Galvanized Steel Nippleis manufactured for use in systems requiring long-span connections in water, air, or gas distribution piping. Made from carbon steel with a hot-dip galvanized finish, this fitting offers enhanced protection in corrosive or humid conditions, making it suitable for both indoor and outdoor installations.

Its extended length and uniform threading make it a dependable solution in applications where rigid support and continuous pressure integrity are essential. Typical uses include mechanical piping runs, utility connections, and industrial process lines.

Product Features

  • ✅Hot-Dip Galvanized CoatingProvides superior protection against oxidation and environmental degradation.
  • ✅Schedule 40 Wall ThicknessOffers structural durability for general-purpose pressure systems.
  • ✅NPT ThreadingMale threads conform to ANSI/ASME B1.20.1 standards for compatibility with standard threaded fittings.
  • ✅Extended Length48-inch cut length reduces the need for coupling multiple shorter nipples, minimizing joint count and leak potential.
  • ✅Versatile UseApplicable in water distribution, air compression systems, and non-aggressive gas service.

Installation Considerations

Installation should be performed using pipe wrenches and approved sealing methods such as PTFE tape or pipe joint compound. Ensure threads are clean and properly aligned before assembly. Over-tightening should be avoided to prevent thread damage and system stress. Installation must conform to local mechanical and plumbing code requirements.

Common Applications

This galvanized steel nipple is commonly integrated into commercial and light industrial piping layouts. It is used in long horizontal spans, drop legs, risers, and system extensions where corrosion protection and mechanical integrity are required.

Material Note

Galvanized steel is favored in above-ground pressure systems due to its abrasion resistance and long service life in contact with moisture, making it a dependable alternative to black steel or non-metallic piping in specific environments.

Technical Specifications

  • Nominal Size1/2 inch
  • Length48 inches
  • MaterialGalvanized Carbon Steel
  • Connection TypeNPT Male x Male
  • Wall ThicknessSchedule 40
  • ConformanceThreads to ANSI/ASME B1.20.1; material per ASTM A53 where applicable

The1/2″ x 48″ Galvanized Steel Nippleoffers reliable performance and corrosion protection in extended piping configurations. Its dimensional consistency and standardized threading make it a preferred choice for mechanical and plumbing professionals working in both new construction and retrofit applications.

Specifications

Specifications Weight 3.410000 Brand Non-Specified Brand ADA Compliance No Length (inches) 48 Width (inches) 0.84 Height (inches) 0.84 Side A 1/2″ Side B 48″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN 563-480HC Material Galvanized Steel Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size and connection details for MPN 563-480HC before ordering.

Brand

Non-Specified Brand

MPN

563-480HC

0
Scroll to Top