Skip to content
Need help identifying a part? Contact parts support
SKU: 6106Brand: Non-Specified Brand
,

1/2 inch x 5 inch Brass Nipple

$3.32

1/2″ x 5″ Lead-Free Brass Pipe Nipple – NPT Threaded Connector for Potable and Mechanical Systems The 1/2″ x 5″ Lead-Free Brass Nipple is a straight, Schedule 40 pipe fitting with National Pipe Taper (NPT) male threads on both ends.

Quantity

1/2″ x 5″ Lead-Free Brass Pipe Nipple – NPT Threaded Connector for Potable and Mechanical Systems

The 1/2″ x 5″ Lead-Free Brass Nipple is a straight, Schedule 40 pipe fitting with National Pipe Taper (NPT) male threads on both ends. It is used for extending pipe runs or joining two female-threaded components in pressurized water systems, HVAC installations, and various mechanical applications requiring corrosion resistance and code compliance for potable water use.

This fitting is machined from lead-free brass alloy (commonly C69300 or equivalent), conforming to federal low-lead mandates and certified under NSF/ANSI 61 and 372. It is compatible with copper, CPVC, or PEX transition assemblies and suitable for use in both hot and cold water systems.

Product Features

  • ✅MaterialLead-free brass, dezincification-resistant (DZR), compliant with ASTM B584 and ANSI/NSF standards.
  • ✅ConnectionNPT male x NPT male, cut and gauged to ASME B1.20.1 specifications.
  • ✅Length5 inches overall, including thread engagement.
  • ✅Pressure RatingUp to 200 PSI at 180°F depending on system configuration and sealing method.
  • ✅ApplicationUsed in potable water supply lines, boiler hookups, water heaters, pump assemblies, and general plumbing systems.

Installation Considerations

Apply PTFE thread tape or a certified thread sealant to both ends before insertion into female-threaded fittings. Use appropriate torque to avoid over-tightening and potential thread damage. For compliance with plumbing codes, installation must be performed by qualified personnel using approved methods and materials.

Typical Use Cases

This fitting is suitable for residential, commercial, and light industrial systems requiring durable and corrosion-resistant pipe extensions. It is frequently used for faucet risers, valve transitions, manifold hookups, and equipment connections where brass is specified for its performance in water exposure conditions.

Code Compliance Note

Lead-free brass components used in drinking water applications must comply with the Safe Drinking Water Act, limiting lead content to no more than 0.25% across wetted surfaces. This nipple meets or exceeds the requirements of NSF/ANSI 61 and 372 for potable systems.

Technical Summary

  • Nominal Size1/2 inch
  • Length5 inches
  • MaterialLead-Free Brass (C69300 or equivalent)
  • Thread StandardNPT Male x NPT Male (ASME B1.20.1)
  • CertificationsNSF/ANSI 61, NSF/ANSI 372

Specifications

Specifications Weight 0.340000 Brand Non-Specified Brand ADA Compliance No Length (inches) 0.75 Width (inches) 0.8 Height (inches) 5 Side A 1/2″ Side B 5″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN NBR035 Material Brass Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size and connection details for MPN NBR035 before ordering.

Brand

Non-Specified Brand

MPN

NBR035

0
Scroll to Top