Skip to content
Need help identifying a part? Contact parts support
SKU: 6275Brand: Non-Specified Brand
,

1/2 inch x 8 inch Galvanized Steel Nipple

$0.93

1/2″ x 8″ Galvanized Steel Pipe Nipple – Threaded, Schedule 40 The 1/2″ x 8″ galvanized steel nipple is a Schedule 40 threaded fitting designed for use in general plumbing, mechanical, and hydronic systems.

Quantity

1/2″ x 8″ Galvanized Steel Pipe Nipple – Threaded, Schedule 40

The1/2″ x 8″galvanized steel nipple is a Schedule 40 threaded fitting designed for use in general plumbing, mechanical, and hydronic systems. Manufactured from welded steel pipe, this component is hot-dip galvanized to provide corrosion protection in both interior and exterior applications where rust resistance is essential.

Performance Characteristics

  • ✅Hot-Dip Galvanized Coating– Zinc coating provides a barrier against corrosion in moist or exposed environments.
  • ✅Threaded NPT Ends– Machined to ANSI B1.20.1 standards for compatibility with standard 1/2″ female pipe threads.
  • ✅Fabricated from Schedule 40 Pipe– Offers consistent wall thickness and strength suitable for moderate-pressure systems.
  • ✅Extended Length– 8″ body allows for bridging longer gaps or for use in custom-built assemblies where spacing is critical.

Specifications

  • Nominal Pipe Size1/2 inch
  • Length8 inches
  • MaterialWelded steel pipe, hot-dip galvanized
  • Thread TypeNPT (National Pipe Tapered), both ends
  • Standard ComplianceASTM A53 / A733

Installation Notes

Thread sealant or PTFE tape should be applied to male threads prior to installation. Tighten using appropriate pipe wrenches without over-torquing to avoid thread deformation. This component is not intended for use in potable water systems in jurisdictions that require lead-free compliance under NSF 61-G or NSF 372.

Common Applications

Used for extensions and spacing in non-potable piping systems such as

  • • Hydronic heating circuits
  • • Compressed air systems
  • • General utility piping in commercial and industrial environments
  • • Water supply lines where corrosion resistance is needed and code permits galvanized materials

Durability Insight

Galvanized steel nipples remain a contractor-preferred option in systems requiring cost-effective corrosion resistance. While not suitable for aggressive or acidic fluids, they perform reliably in standard atmospheric and wet conditions.

This1/2″ x 8″ galvanized steel nippleis engineered to meet demanding system requirements while ensuring dimensional accuracy and installation consistency. Suitable for mechanical and plumbing professionals seeking dependable threaded connections in building systems.

Specifications

Specifications Weight 0.510000 Brand Non-Specified Brand ADA Compliance No Length (inches) 0.8 Width (inches) 7.9 Height (inches) 0.85 Side A 1/2″ Side B 8″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN 563-080 Material Galvanized Steel Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

563-080

0
Scroll to Top