K-FLEX 6RX038138 – 1-3/8″ ID Rubber Pipe Insulation, 3/8″ Wall Thickness
The K-FLEX 6RX038138 is a 6-foot length of flexible elastomeric pipe insulation designed to control heat loss and prevent condensation on piping systems. With a 1-3/8″ inside diameter and 3/8″ wall thickness, this non-slit tubing is constructed from closed-cell NBR/PVC-based foam for thermal performance and moisture resistance in commercial and industrial mechanical applications.
Key Performance Characteristics
- Thermal Conductivity≤ 0.27 Btu·in/hr·ft²·°F at 75°F
- Service Temperature Range297°F to +220°F (-182°C to +104°C)
- Water Vapor Transmission≤ 0.08 perm-in (ASTM E96)
- Flame/Smoke RatingASTM E84 25/50 compliant for most building codes
- MaterialNBR/PVC closed-cell elastomeric foam
Installation Guidance
This preformed rubber insulation is intended for use on chilled water, hot water, and refrigerant lines. It should be field-trimmed to length and secured with approved contact adhesive or pressure-sensitive tape for a continuous vapor barrier. Ensure all seams, joints, and terminations are sealed to maintain insulation integrity. Mechanical fastening methods may also be applied where necessary.
Application Overview
Professional UseIdeal for commercial plumbing, HVAC, and refrigeration systems requiring thermal protection and moisture control. Suitable for indoor mechanical rooms and areas requiring fire-rated insulation solutions.
Maintenance SettingsCommonly used in retrofit or energy conservation upgrades in institutional or industrial facilities where minimizing heat gain/loss and avoiding condensation are operational priorities.
Product Specifications
- Internal Diameter1-3/8 inches
- Wall Thickness3/8 inch
- Length6 feet (non-slit configuration)
- ConstructionClosed-cell elastomeric rubber foam
Specifications
Buying Information
Confirm the 6RX038138 and the listed application before ordering.




