Skip to content
Need help identifying a part? Contact parts support
SKU: 1947364Brand: Non-Specified Brand
,

1/4 inch Brass Square Head Plug

$1.35

1/4 Inch Brass Square Head Plug – Threaded Pipe Plug for System Termination The 1/4 inch Brass Square Head Plug is a precision-machined threaded fitting used to terminate or close off female-threaded pipe openings.

Quantity
SKU: 1947364 Categories: ,

1/4 Inch Brass Square Head Plug – Threaded Pipe Plug for System Termination

The1/4 inch Brass Square Head Plugis a precision-machined threaded fitting used to terminate or close off female-threaded pipe openings. Manufactured from lead-free brass, it is suitable for use in fluid, air, gas, or hydraulic systems where corrosion resistance and mechanical strength are essential.

Technical Specifications

  • Size1/4 inch NPT (National Pipe Thread)
  • MaterialLead-free brass (compliant with NSF/ANSI 372)
  • Connection TypeMale-threaded square head plug
  • Temperature Range65°F to 250°F (-54°C to 121°C)
  • Maximum PressureUp to 1,200 PSI (non-shock)

Performance and Application

  • Thread IntegrityMachined NPT threads ensure leak-resistant engagement with female pipe threads in accordance with ASME B1.20.1 standards.
  • Corrosion ResistanceBrass composition provides excellent resistance to water, oils, air, and non-aggressive chemicals.
  • Service VersatilitySuitable for use in industrial, mechanical, and hydronic systems including manifolds, pressure gauges, and equipment drains.

Installation Considerations

This square head plug is designed for installation using a wrench or socket on the square head, providing torque without damaging the threads. For pressure-tight connections, apply thread sealant or PTFE tape to the male threads before assembly. Always follow torque recommendations and inspect for proper engagement.

Common Use Cases

  • Sealing unused ports in brass or iron manifolds
  • Drain ports in air compressor tanks
  • Plugging gauge or test taps in fluid systems
  • Temporary or permanent termination of pipe runs

Code and Compliance Notes

This fitting complies with federal Safe Drinking Water Act (SDWA) requirements for low-lead brass content. Applicable for potable water systems in jurisdictions requiring NSF/ANSI 61 and 372 certifications.

The1/4 inch Brass Square Head Plugoffers a secure and serviceable solution for end-of-line pipe terminations or system isolations. Its mechanical strength, corrosion resistance, and tight-thread fit make it a standard component in professional plumbing and mechanical installations.

Specifications

Specifications Weight 0.030000 Brand Non-Specified Brand ADA Compliance No Length (inches) 0.45 Width (inches) 0.45 Height (inches) 0.7 Side A 1/4″ Fitting Type Plugs Item Type Fittings Manufacturer Non Specified Manufacturer MPN 310-181NL Material Brass Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size, connection, or rating details for MPN 310-181NL before ordering.

Brand

Non-Specified Brand

MPN

310-181NL

0
Scroll to Top