Details
Model10260
ManufacturerIPS Weld-On
Product NameWeld-On 790 Multi-Purpose Cement
Part Number21688
Container Size1/4 Pint (4 fl oz) Can
DescriptionMedium-bodied, fast-setting, low-VOC solvent cement designed for joining PVC and CPVC pipe and fittings up to 6 inches in diameter, formulated for both pressure and non-pressure systems.
Product Overview
Weld-On 790 Multi-Purpose Cement is a professional-grade solvent adhesive formulated for use with PVC and CPVC piping systems. This medium-bodied, low-VOC cement is designed for joining all classes and schedules of pipe through 6 inches in diameter (Schedule 80 up to 4 inches). Its fast-setting formula produces high-strength, solvent-welded joints suitable for pressure and non-pressure applications. Weld-On 790 maintains optimal flow characteristics for brush application, ensuring uniform coverage and effective bonding under standard installation conditions. The formulation meets strict air quality standards while providing rapid set and cure times for efficient system assembly.
Technical Specifications
- Manufacturer Part Number10260
- Alternate Part Number21688
- Product TypeMulti-Purpose Solvent Cement
- Compatible MaterialsPVC and CPVC pipe and fittings
- Container Size1/4 Pint (4 fl oz) metal can with integrated brush applicator
- AppearanceMedium-bodied, syrupy liquid, light amber color
- Base ChemistryKetone-based solvent blend
- Chemical CompositionTetrahydrofuran (THF), Methyl Ethyl Ketone (MEK), Cyclohexanone
- Specific Gravity0.934 ± 0.02
- VOC Content<490 g/L (Low-VOC formulation)
- Flash Point4°F (-20°C), closed cup
- Body TypeMedium-bodied
- Set TimeFast setting; cure time dependent on pipe size, temperature, and humidity
- Pipe/Fitting RangeUp to 6″ (160 mm) diameter, Schedule 80 through 4″ (110 mm)
- Joint TypeInterference-fit, solvent-welded connection
- Pressure RatingSuitable for pressure and non-pressure applications
- Primer RequirementPrimer required for pressure-rated systems; may be omitted for non-pressure applications if permitted by local code
- Operating Temperature RangeUp to 140°F (60°C)
- ComplianceASTM D2564 (PVC), ASTM F493 (CPVC), NSF/ANSI 61 (potable water), SCAQMD Rule 1168/316A
- Shipping ClassificationORM-D, Consumer Commodity
- Application EnvironmentIndoor or outdoor, pressure or drain/waste/vent installations
Installation Notes
- Ensure mating surfaces are clean, dry, and free from grease, oil, or other contaminants.
- Apply primer to both pipe and fitting socket surfaces when required by local plumbing or mechanical code.
- Brush an even, liberal coat of Weld-On 790 on both surfaces using the included applicator.
- Assemble joint immediately, rotating the pipe a quarter turn to evenly distribute cement.
- Hold joint in place for several seconds to prevent push-out; wipe excess cement from the joint area.
- Allow adequate cure time before testing or pressurizing the system per manufacturer recommendations.
Summary
The IPS Weld-On 790 Multi-Purpose Cement (1/4 Pint) is a light amber, medium-bodied, fast-setting solvent adhesive designed for PVC and CPVC piping systems up to 6 inches in diameter. Formulated for low VOC compliance and high joint integrity, it delivers consistent performance in both pressure and non-pressure applications where a professional-grade solvent weld is required.




