Skip to content
Need help identifying a part? Contact parts support
SKU: 1857686Brand: Non-Specified Brand
,

1 inch Copper Tee Copper x Copper

$5.06

1 Inch Copper Tee – Sweat x Sweat x Sweat, Lead-Free The 1 inch Copper Tee is a solder joint fitting used for branching copper tubing systems in potable water, hydronic heating, and low-pressure applications.

Quantity
SKU: 1857686 Categories: ,

1 Inch Copper Tee – Sweat x Sweat x Sweat, Lead-Free

The 1 inch Copper Tee is a solder joint fitting used for branching copper tubing systems in potable water, hydronic heating, and low-pressure applications. Featuring three female solder (cup) ends, this tee allows for equal-size tubing connections, facilitating consistent layout across distribution lines.

Application and Performance Features

This fitting is designed for use in pressurized and non-pressurized copper systems requiring a perpendicular branch connection. Manufactured from wrought copper or cast bronze, it supports long-term performance under thermal cycling and internal system pressure.

  • ✅Uniform Wall ThicknessConforms to ASME B16.22 specifications, ensuring consistent durability and dimensional integrity.
  • ✅Lead-Free MaterialManufactured to comply with NSF/ANSI 61 and 372 standards for potable water systems.
  • ✅Sweat ConnectionsSuitable for soldered joints using ASTM B88 tubing (Types L and M).

Technical Specifications

  • MaterialC12200 Copper or equivalent lead-free alloy
  • Size1 inch nominal
  • Connection TypeCup x Cup x Cup (Solder/Sweat)
  • ComplianceASME B16.22; NSF/ANSI 61 & 372
  • Pressure RatingUp to 200 PSI for water applications
  • Temperature RatingSuitable for systems up to 400°F (solder joint dependent)

Installation Guidelines

Install using standard soldering techniques with appropriate flux and lead-free solder. All pipe ends should be reamed, cleaned, and dry-fitted prior to assembly. Heating should be evenly applied, and joints should be visually inspected for complete solder flow. Use in accordance with local code requirements and manufacturer specifications.

Common Applications

This copper tee is commonly installed in residential and commercial water supply systems, heating loops, and branch line configurations. It is also used in retrofits, riser assemblies, and mechanical room installations where durability and reliability are critical.

Regulatory Compliance

This fitting meets the requirements of the U.S. Safe Drinking Water Act and is approved for use in all jurisdictions requiring lead-free components for potable water distribution systems.

The 1 inch Copper Tee (Sweat x Sweat x Sweat) offers a code-compliant, long-lasting solution for branching copper lines in pressurized systems. Its consistent dimensions, compatibility with industry-standard tubing, and lead-free construction make it a dependable choice for professional-grade installations.

Specifications

Specifications Weight 0.480000 Brand Non-Specified Brand ADA Compliance No Application Potable Water, Hydronic Heating (with Glycol), Chilled Water, Compressed Air (200 psi Max), Non-Medical Gases (140 psi Max), Low Pressure Steam (15 psi Max), Vacuum (24.5 in Mercury Max at 68 deg F) Length (inches) 2 Width (inches) 3.75 Height (inches) 2.5 End Style Copper x Copper x Copper Side A 1″ Side B 1″ Side C 1″ Fitting Type Tees Item Type Fittings Manufacturer Non Specified Manufacturer MPN PF 04048 Material Copper Product Family Fittings Warranty 50 Years Limited Item Returns This item can be returned

Buying Information

Match PF 04048 to the existing component before ordering

Brand

Non-Specified Brand

MPN

PF 04048

0
Scroll to Top