Skip to content
Need help identifying a part? Contact parts support
SKU: 8132Brand: Non-Specified Brand
,

1 inch Galvanized Iron Floor Flange

$2.97

1 inch Galvanized Malleable Iron Floor Flange – Secure Pipe-to-Surface Mounting The 1 inch Galvanized Malleable Iron Floor Flange is engineered to provide a rigid and stable pipe mounting point in horizontal installations.

Quantity
SKU: 8132 Categories: ,

1 inch Galvanized Malleable Iron Floor Flange – Secure Pipe-to-Surface Mounting

The 1 inch Galvanized Malleable Iron Floor Flange is engineered to provide a rigid and stable pipe mounting point in horizontal installations. This fitting is commonly used for terminating piping runs at floors or structural surfaces where a firm, bolted-down connection is required. The flange is designed for use with schedule 40 or 80 threaded steel piping and supports both mechanical and plumbing system assemblies.

Manufactured from malleable iron and hot-dip galvanized in accordance with ASTM A153 standards, this flange offers superior corrosion resistance for use in a variety of environments. It meets dimensional tolerances in accordance with ASME B16.3 and threading requirements per ANSI/ASME B1.20.1.

Key Technical Features

  • MaterialGalvanized Malleable Iron
  • Nominal Size1 inch
  • Connection TypeFemale NPT threads
  • Bolt HolesTypically four (Ø varies by manufacturer), suitable for anchoring to wood, concrete, or metal substrates
  • Surface FinishHot-dip galvanized for rust resistance in humid or outdoor environments
  • Working PressureMatches the rating of the connected piping system (generally up to 300 psi for malleable iron fittings)

Installation Guidelines

Ensure threads are clean and undamaged before installation. Apply thread sealant (PTFE tape or approved pipe dope) to male threads before engaging with the flange’s internal threads. Torque by hand initially and then tighten using appropriate tools to achieve a leak-tight seal. Bolt holes should be aligned prior to final threading. Anchoring should be done with hardware rated for the substrate material.

Common Applications

  • Securing vertical pipe drops to slab or flooring systems
  • Supporting gas or water piping in mechanical rooms or service corridors
  • Mounting piping to machinery bases or structural platforms
  • Providing terminations in outdoor installations subject to moisture

Did You Know?

Galvanized malleable iron flanges are preferred in exterior installations because they combine high mechanical strength with resistance to oxidation. Their wide bolt footprint also distributes load effectively, minimizing strain on the joint and supporting substrate.

The 1 inch Galvanized Floor Flange is a standard component for anchoring pipe runs where alignment and stability are critical. Its durable construction, compatibility with threaded iron pipe systems, and corrosion-resistant finish make it suitable for high-demand plumbing and mechanical assemblies.

Specifications

Specifications Weight 1.011900 Brand Non-Specified Brand ADA Compliance No Length (inches) 2.88 Width (inches) 2.88 Height (inches) 2.88 Side A 1″ Fitting Type Flanges Item Type Fittings Manufacturer Non Specified Manufacturer MPN 511-605 Material Galvanized Iron Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

511-605

0
Scroll to Top