1 inch PEX Elbow – Insert Fitting for Directional Transitions in PEX Systems
The1 inch PEX x 1 inch PEX Elbowis a high-performance insert fitting designed to facilitate 90° directional changes in cross-linked polyethylene (PEX) piping systems. Manufactured from high-strength engineered polymer, it supports pressure-rated potable water and hydronic distribution applications. The fitting connects two 1 inch PEX lines using ASTM F1807 or F2159 crimp/clamp techniques and is suitable for use in residential and light commercial construction.
This elbow enables streamlined routing in tight installations where bends are not feasible or where flow direction changes must occur without altering pipe size. Its molded insert barbs provide reliable engagement with PEX tubing and maintain joint integrity under thermal cycling and variable pressure conditions.
Contractor-Grade Features
- ✅Certified Insert DesignMachined to meet dimensional tolerances under ASTM and NSF standards for potable water systems.
- ✅High-Performance PolymerEngineered from corrosion-resistant, lead-free plastic (e.g., PPSU), offering durability in chlorinated water environments.
- ✅Uniform Pressure RatingDesigned for use in systems rated up to 200 PSI @ 73°F per ASTM standards.
- ✅Thermal and Mechanical StabilityMaintains integrity under repeated expansion, contraction, and vibration loads.
Technical Specifications
- MaterialEngineered Polymer (typically Polyphenylsulfone – PPSU)
- Nominal Size1 inch x 1 inch
- Connection TypeInsert – PEX Crimp or Clamp (ASTM F1807 / F2159)
- CertificationsNSF/ANSI 61, NSF/ANSI 372, ASTM F2159 compliant
Applications
Used in PEX distribution systems for potable water, radiant heating, and recirculating loops, this elbow fitting enables efficient direction changes at 90° where bends are impractical. Common in manifold systems, wall cavities, and compact pipe chases requiring precise layout alignment.
Installation Note
Install using approved crimp or clamp rings with a calibrated tool per the PEX system manufacturer’s specifications. Ensure the fitting is free from debris and properly seated to avoid dimensional misalignment and ensure full engagement of sealing surfaces.
Professional Application
The1 inch PEX x 1 inch PEX Elbowis designed to meet the demands of high-volume plumbing projects requiring reliability, dimensional accuracy, and long-term code compliance. Suitable for installation in both new builds and retrofits where performance and regulatory conformity are non-negotiable.
Specifications
Buying Information
Match Q4761000 to the existing connection and size before ordering.




