Weld-On 11027 FlowGuard Gold CPVC Solvent Cement – 1 Pint, Yellow
The Weld-On 11027 FlowGuard Gold CPVC Solvent Cement is a professional-grade, low VOC, medium-bodied cement engineered for joining CPVC copper tube size (CTS) piping systems. Specifically formulated for interference-fit joints up to 2 inches (63 mm) in diameter, this cement provides a fast-setting, high-strength bond suitable for potable water distribution, hot and cold water systems, and other CPVC applications. The FlowGuard Gold formulation ensures uniform solvent penetration and fusion, producing durable, pressure-rated joints that meet applicable codes and standards for CPVC installations.
Technical Specifications
- ManufacturerIPS Corporation
- BrandWeld-On
- Product NameFlowGuard Gold CPVC Solvent Cement
- Part Number11027
- Container Size1 Pint (0.473 L)
- FormSyrupy Liquid
- ColorYellow
- OdorKetone
- VOC Content< 490 g/L
- Flash Point4°F (-20°C)
- Specific Gravity0.986
- Chemical CompositionTetrahydrofuran, Methyl Ethyl Ketone, Cyclohexanone
- Body TypeMedium-Bodied
- Set TimeFast-Setting Formulation
- Application RangeCPVC Copper Tube Size Pipe and Fittings up to 2″ (63 mm)
- Joint TypeInterference Fit
- Operating ConditionsFor use in pressure and non-pressure CPVC systems
- Temperature RangeSuitable for hot and cold potable water applications
- VOC ComplianceMeets SCAQMD Rule 1168/316A and LEED® requirements
- ApplicationPotable water, hydronic systems, and general CPVC piping installations
- Primer RequirementMay be used without primer where permitted by local code
- PackagingMetal can with applicator brush in cap
- ClassificationConsumer Commodity, ORM-D
- ComplianceMeets ASTM F493 for CPVC solvent cements
Performance and Application
The Weld-On FlowGuard Gold 11027 CPVC Solvent Cement delivers fast, uniform solvent welding for copper tube size CPVC systems. Its medium-bodied consistency allows efficient coverage and optimal penetration on both pipe and fitting surfaces, producing high-pressure, leak-free joints under proper assembly conditions. The low VOC formulation provides environmental compliance without compromising cure strength or working time. Suitable for use in potable water, hydronic, and residential or commercial piping systems, this cement ensures reliable fusion in both new installations and system retrofits. When used in accordance with ASTM and local plumbing code specifications, it eliminates the need for primer where approved by jurisdiction.
Summary
The Weld-On 11027 FlowGuard Gold CPVC Solvent Cement provides professional contractors with a fast-setting, high-strength joining solution for CPVC piping systems up to 2 inches in diameter. Its medium-bodied, low VOC composition, yellow identification color, and compatibility with potable water applications make it a dependable product for code-compliant CPVC installations.




