Weld-On 11026 FlowGuard Gold CPVC Solvent Cement – 1 Quart, Yellow
The Weld-On 11026 FlowGuard Gold CPVC Solvent Cement is a medium-bodied, low VOC, high-strength solvent cement formulated for joining copper tube size (CTS) CPVC pipe and fittings. Engineered for professional plumbing and mechanical installations, this fast-setting cement produces durable, pressure-rated joints suitable for hot and cold potable water systems, hydronic piping, and commercial CPVC applications. The formulation provides excellent gap-filling and fusion properties, allowing reliable joint integrity under high service temperatures and pressure conditions.
Technical Specifications
- ManufacturerIPS Corporation
- BrandWeld-On
- Product NameFlowGuard Gold CPVC Solvent Cement
- Part Number11026
- Container Size1 Quart (0.946 L)
- FormSyrupy Liquid
- ColorYellow
- OdorKetone
- VOC Content< 490 g/L
- Flash Point4°F (-20°C)
- Specific Gravity0.986
- Chemical CompositionTetrahydrofuran, Methyl Ethyl Ketone, Cyclohexanone
- Body TypeMedium-Bodied
- Set TimeFast-Setting
- Pipe/Fitting CompatibilityCPVC Copper Tube Size (CTS) Pipe and Fittings
- Maximum Pipe DiameterUp to 2 inches (63 mm)
- Joint TypeInterference Fit
- Application ConditionsPressure and Non-Pressure CPVC Piping Systems
- Temperature RangeSuitable for hot and cold potable water applications
- Primer RequirementCan be used without primer where approved by local code
- VOC ComplianceMeets SCAQMD Rule 1168/316A and LEED® EQ Credit requirements
- PackagingMetal Can with Applicator Brush in Cap
- ClassificationConsumer Commodity, ORM-D
- ComplianceMeets ASTM F493 standards for CPVC solvent cements
Performance and Application
The Weld-On 11026 FlowGuard Gold CPVC Solvent Cement is designed for professional use where rapid assembly and dependable joint performance are required. Its low VOC, high-strength formulation ensures superior fusion between CPVC pipe and fittings, achieving a permanent bond under a wide range of installation conditions. The medium-bodied consistency provides controlled flow and full surface coverage, even in tight joint tolerances. The fast set time supports efficient installation schedules in both residential and commercial environments. When applied correctly, the cement creates a chemically fused joint capable of withstanding internal system pressures and thermal expansion stresses inherent in hot water distribution systems.
Summary
The Weld-On 11026 FlowGuard Gold CPVC Solvent Cement provides professional contractors with a reliable, fast-setting, medium-bodied cement for CPVC copper tube size piping systems up to 2 inches in diameter. Its low VOC formulation, yellow color identification, and high bond integrity make it a preferred solution for code-compliant potable water and hydronic piping installations.




