Skip to content
Need help identifying a part? Contact parts support
SKU: 21692Brand: Weld-On
,

1 Quart Multi-Purpose Cement with Applicator Cap

$11.45

Details Model: 10257 Manufacturer: IPS Weld-On Product Name: Weld-On 790 Multi-Purpose Cement Part Numbers: 11036 / 21692 Container Size: 1 Quart (32 fl oz) Can Description: Medium-bodied, fast-setting, low-VOC solvent cement formulated for joining PVC and CPVC pipe and fittings…

Quantity

Details

Model10257
ManufacturerIPS Weld-On
Product NameWeld-On 790 Multi-Purpose Cement
Part Numbers11036 / 21692
Container Size1 Quart (32 fl oz) Can
DescriptionMedium-bodied, fast-setting, low-VOC solvent cement formulated for joining PVC and CPVC pipe and fittings through 6 inches in diameter. Suitable for both pressure and non-pressure piping applications.

Product Overview

Weld-On 790 Multi-Purpose Cement is a professional-grade solvent adhesive engineered for the installation of PVC and CPVC piping systems in plumbing, industrial, and mechanical applications. This medium-bodied, low-VOC compound delivers a strong, permanent bond with fast set and cure times, allowing for efficient assembly of piping systems up to 6 inches in diameter (Schedule 80 through 4 inches). The ketone-based formulation provides consistent solvent penetration and adhesion under standard field conditions. Weld-On 790 is approved for use on both pressure and non-pressure systems when installed in compliance with applicable codes and standards.

Technical Specifications

  • Manufacturer Part Number10257
  • Alternate Part Numbers11036 / 21692
  • Product TypeMulti-Purpose Solvent Cement
  • Compatible MaterialsPVC and CPVC pipe and fittings
  • Body TypeMedium-bodied
  • ColorClear
  • ViscositySyrupy liquid consistency
  • Container Size1 Quart (32 fl oz) metal can with brush applicator
  • Base ChemistryKetone-based solvent blend
  • Chemical CompositionTetrahydrofuran (THF), Methyl Ethyl Ketone (MEK), Cyclohexanone
  • Specific Gravity0.934 ± 0.02
  • VOC Content<490 g/L (Low-VOC formulation)
  • Flash Point4°F (-20°C), closed cup
  • Set TimeFast setting; varies by pipe size, temperature, and humidity
  • Pipe/Fitting RangeAll classes/schedules up to 6 in. (160 mm) diameter; Schedule 80 through 4 in. (110 mm)
  • Joint TypeSolvent-welded, interference-fit connection
  • Pressure RatingSuitable for pressure and non-pressure systems per ASTM and code requirements
  • Primer RequirementRequired for pressure-rated systems; optional for non-pressure systems where permitted by local code
  • Maximum Operating Temperature140°F (60°C)
  • ComplianceASTM D2564 (PVC), ASTM F493 (CPVC), NSF/ANSI 61 (potable water), SCAQMD Rule 1168/316A (Low VOC)
  • Shipping ClassificationORM-D, Consumer Commodity
  • Use ApplicationsPressure piping, water distribution, chemical processing, and drain/waste/vent systems

Installation Notes

  • Inspect and clean pipe and fitting surfaces to remove dirt, oil, and moisture before assembly.
  • Apply primer where required by code or for pressure-rated piping systems.
  • Use the included brush applicator to apply an even, full coat of cement to both pipe and fitting socket.
  • Assemble immediately with a quarter-turn twist to ensure uniform solvent distribution and bonding.
  • Hold joint in position for several seconds to prevent separation; remove excess cement.
  • Allow appropriate set and cure times before pressure testing in accordance with Weld-On cure time charts.
  • Do not dilute or thin cement; store in original, tightly sealed container away from ignition sources.

Summary

The IPS Weld-On 790 Multi-Purpose Cement (1 Quart) is a clear, medium-bodied, fast-setting solvent adhesive formulated for use with PVC and CPVC piping systems. Designed for high-strength joint integrity and low-VOC compliance, it supports both pressure and non-pressure applications up to 6 inches in diameter and conforms to ASTM, NSF, and local plumbing standards for professional installations.

Specifications

Specifications Weight 2.310000 Length (inches) 4.19 Width (inches) 4.19 Height (inches) 5.5 Item Type Cements Brand Weld-On Manufacturer IPS Corporation MPN 107900021 Sub Type Low VOC Medium Body Multi-Purpose Color Clear Container Size 1 qt Odor/Scent Ketone Setting Time Fast Application For potable water, DWV or sewer waste applications Item Returns This item can be returned
Brand

Weld-On

MPN

107900021

0
Scroll to Top