Weld-On 14030 Plumbing Primer is a low-VOC, fast-acting solvent preparation formulated for use on PVC and CPVC piping systems. Designed for professional use in pressure and non-pressure applications, this primer chemically softens and prepares thermoplastic pipe and fitting surfaces to promote maximum bond strength when solvent cementing. The product’s thin consistency ensures uniform surface penetration and rapid evaporation, enabling consistent joint integrity under code-compliant installation standards.
Details
- Model14030
- ManufacturerIPS Corporation (Weld-On)
- Product NamePlumbing Primer
- Container Size1 Quart (0.95 L)
- FormThin liquid
- ColorClear (also available in purple – verify code requirements)
- VOC Content< 542 g/L
- Flash Point4°F (-20°C)
- Specific Gravity0.846 ± 0.02
- OdorEthereal solvent
- PackagingMetal can with resealable lid
- ApplicationSurface preparation for solvent welding PVC and CPVC piping systems
Technical Specifications
- Applicable MaterialsPVC and CPVC pipe and fittings
- Chemical CompositionTetrahydrofuran (THF), Methyl Ethyl Ketone (MEK), Cyclohexanone, Acetone
- Boiling Range133°F to 310°F (56°C to 154°C)
- Vapor PressureApprox. 160 mmHg @ 20°C
- Evaporation RateFast
- ConsistencyLow-viscosity, non-bodied solvent system
- Operating Temperature Range40°F to 110°F (4°C to 43°C)
- Storage ConditionsStore in tightly sealed container below 110°F (43°C); protect from open flame or sparks
- Application MethodApply with a clean dauber, swab, or lint-free cloth to both joint surfaces prior to solvent cement application
- CompatibilitySuitable for Schedule 40 and Schedule 80 PVC/CPVC pressure and DWV systems
- ComplianceMeets ASTM F656; SCAQMD Rule 1168 compliant (low-VOC classification)
- Regulatory ClassificationORM-D / Consumer Commodity for shipping
- Shelf Life3 years (unopened container, stored per manufacturer guidelines)
Summary
Weld-On 14030 Clear PVC/CPVC Plumbing Primer is a professional-grade solvent formulation designed for surface preparation of thermoplastic piping systems. Its low-viscosity, high-volatility blend of active solvents provides rapid softening and optimal bonding conditions when used in conjunction with compatible solvent cements. The primer meets ASTM F656 standards and supports code-compliant PVC and CPVC installations in pressure and drain-waste-vent applications across commercial and industrial environments.




