Skip to content
Need help identifying a part? Contact parts support
SKU: 1720Brand: HoneywellAvailability: Out of Stock
,

1″ Sweat Zone Valve, Terminal Block

$37.02

Honeywell V8043F1051 Zone Valve – 1″ Sweat, 24V Two-Way On/Off with End Switch The Honeywell V8043F1051 is a two-position, motorized zone valve designed for use in hydronic heating systems. This low-voltage model includes an end switch and features 1″ sweat connections for direct…

Out of stock

Honeywell V8043F1051 Zone Valve – 1″ Sweat, 24V Two-Way On/Off with End Switch

The Honeywell V8043F1051 is a two-position, motorized zone valve designed for use in hydronic heating systems. This low-voltage model includes an end switch and features 1″ sweat connections for direct integration into copper pipe systems. It is commonly used for zoning hot water baseboard or radiant heating applications.

Product Overview

  • Valve TypeTwo-way, normally closed when de-energized
  • End SwitchIntegral switch provides control signal to circulators or burners when valve is fully open
  • Manual OpenerBuilt-in lever allows manual valve actuation during power outages or system filling
  • PowerheadRemovable actuator for service without draining the system or cutting lines
  • Actuation TimeMotor-driven open in approximately 15 seconds; spring-return close

Key Features

  • Connection Type1″ sweat (copper)
  • Flow CoefficientCv rating of 3.5 for hot water applications
  • Voltage24 VAC, 50/60 Hz low voltage operation
  • Electrical TerminationTerminal block for secure, low-voltage wiring
  • Serviceable PowerheadReplaceable without opening the piping circuit

Technical Specifications

  • ModelV8043F1051/U
  • Maximum Fluid Temperature200°F (93°C)
  • Maximum Close-Off Pressure20 PSI
  • Ambient Operating TemperatureUp to 125°F (52°C)
  • End Switch Rating50 VA pilot duty @ 24V AC

Installation Considerations

The V8043F1051 should be mounted with the actuator in a horizontal position to avoid exposure to condensate. It is intended for use in closed-loop hydronic systems and should be installed in accordance with applicable codes. Ensure compatibility with thermostat and control equipment prior to wiring.

Application Notes for Contractors

  • Includes end switch for integration with system controls such as relays or aquastats
  • Suitable for zoning hot water heating loops in multi-zone residential systems
  • Manual lever aids in system purging or testing without power
  • Quick-change actuator reduces service time during field replacement

System Compatibility

  • Designed for use with standard 24V thermostats and multi-zone relay panels
  • Appropriate for use with circulator- or zone-valve-based hydronic heating systems
  • Supports systems with up to 20 PSI close-off requirements

Specifications

Specifications Weight 1.980000 Length (inches) 1 Width (inches) 3.88 Height (inches) 4 Item Type Zone Valves & Controls Brand Honeywell Coefficient of Volume 3.5 Cv Manufacturer Ademco, Inc. MPN V8043F1051/U Overall Depth 2-3/8 in Sub Type 2-Way Low Voltage Amperage Rating 0.3 A Body Material Brass Connection Type Sweat Differential 20 psi Domestic/Import Import Electrical Connections Screw Terminal Block End Style C Water Temperature 50 to 200 deg F Material Brass Nominal Size 1 in Overall Width 4-7/8 in Pressure Rating 125 PSI Temperature Rating 50 to 200 Deg F Fluid Application Zoning Includes Easy Installation, Manual Opener for Valve Operation, End Switch Enclosure Primary Voltage 24 VAC Item Returns This item can be returned

Buying Information

Confirm the listed Honeywell V8043F1051/U identifier and configuration match your application before ordering.

Brand

Honeywell

MPN

V8043F1051/U

0
Scroll to Top