Skip to content
Need help identifying a part? Contact parts support
SKU: 1949347Brand: Non-Specified Brand
,

1 inch x 1/2 inch Copper Press Reducing Coupling Press Fitting x Copper

$2.84

1 Inch x 1/2 Inch Copper Press Reducing Coupling – High-Integrity Transition Fitting The 1 inch x 1/2 inch Copper Press Reducing Coupling is a precision-engineered fitting designed for use in potable water and hydronic systems requiring a size transition between copper tubing.

Quantity
SKU: 1949347 Categories: ,

1 Inch x 1/2 Inch Copper Press Reducing Coupling – High-Integrity Transition Fitting

The 1 inch x 1/2 inch Copper Press Reducing Coupling is a precision-engineered fitting designed for use in potable water and hydronic systems requiring a size transition between copper tubing. This component supports a press connection method, allowing for efficient, flameless installation in new builds, retrofits, and confined service areas.

Performance and Compliance

Manufactured from lead-free copper alloy and designed in accordance with applicable plumbing and mechanical codes, this reducing coupling ensures a permanent, secure seal when properly installed using approved press tools. It is ideal for pressure-rated systems where reliability and long service life are required.

  • ✅ANSI/NSF ComplianceCertified for potable water use (NSF/ANSI 61 and 372)
  • ✅Operating PressureUp to 200 PSI (dependent on system configuration and pipe support)
  • ✅Temperature Range0°F to 250°F continuous service

Application Scope

Commonly used in copper plumbing systems to transition between 1 inch and 1/2 inch pipe sizes, particularly in branch lines, riser drops, or fixture supply runs. The compact press profile reduces installation time while ensuring uniform joint integrity in multi-unit or large-scale installations.

Installation Requirements

Install using manufacturer-approved press tools (typically V-profile) with properly prepared copper tubing. Deburr and mark insertion depth for quality assurance prior to pressing. No soldering, flux, or flame required. Avoid dry pressing; follow all recommended torque and cycle checks for tool calibration.

  • ✅Press-to-Connect AssemblyEliminates the need for flame or curing time
  • ✅Reduced LaborIdeal for fast-paced commercial and residential projects
  • ✅Reliable Joint SealingLeak-free connections with minimal skill variance

Material Composition

Constructed from high-purity, lead-free copper in compliance with ASTM B75/B88. This ensures corrosion resistance and mechanical integrity over long service intervals, even under frequent thermal cycling or intermittent flow conditions.

Specifications

  • MaterialLead-free copper
  • End ConnectionsPress (1″ x 1/2″)
  • StandardsNSF/ANSI 61 & 372, UPC listed, complies with IPC and UPC codes
  • Connection ProfileCompatible with standard copper press tooling

Technical Highlights

  • ✅Durable Copper BodyEngineered for long-term system performance
  • ✅Compact ProfileSupports close-to-wall or congested pipe configurations
  • ✅Code-ApprovedSuitable for potable water and closed-loop hydronic applications

Specify the 1 inch x 1/2 inch Copper Press Reducing Coupling for professional-grade installations where size reduction, flame-free assembly, and performance reliability are essential. Compatible with most press systems and certified for safe use in potable water applications.

Specifications

Specifications Weight 0.130000 Brand Non-Specified Brand ADA Compliance No Application Potable Water, Hydronic Heating (with Glycol), Chilled Water, Compressed Air (200 psi Max), Non-Medical Gases (140 psi Max), Low Pressure Steam (15 psi Max), Vacuum (24.5 in Mercury Max at 68 deg F) Length (inches) 1 Width (inches) 1 Height (inches) 2.3 End Style Copper x Copper Side A 1″ Side B 1/2″ Fitting Type Coupling Item Type Fittings Manufacturer Non Specified Manufacturer MPN PF 01339 Material Copper Product Family Fittings Warranty 50 Years Limited Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

PF 01339

0
Scroll to Top