Skip to content
Need help identifying a part? Contact parts support
SKU: 1859360Brand: Non-Specified Brand
,

1 inch x 1 inch x 1/2 inch Copper Press Reducing Tee Copper x Copper x Copper

$5.89

1″ x 1″ x 1/2″ Copper Press Reducing Tee – For Secure Branch Reductions in Potable Water Systems The 1″ x 1″ x 1/2″ copper press reducing tee provides a compact and reliable solution for branch reductions in copper piping systems.

Quantity
SKU: 1859360 Categories: ,

1″ x 1″ x 1/2″ Copper Press Reducing Tee – For Secure Branch Reductions in Potable Water Systems

The 1″ x 1″ x 1/2″ copper press reducing tee provides a compact and reliable solution for branch reductions in copper piping systems. Manufactured from lead-free wrought copper, this tee is engineered for use in both commercial and residential pressure applications requiring durable, permanent connections.

With press-to-connect technology and factory-installed sealing elements, this fitting minimizes installation time while maintaining consistent mechanical integrity. It is suitable for hot and cold potable water, HVAC hydronic systems, and low-pressure steam applications.

Product Specifications

  • MaterialC12200 alloy, lead-free wrought copper
  • Size1″ x 1″ x 1/2″
  • Connection TypePress x Press x Press
  • Seal ElementEPDM (factory installed)
  • Pressure Rating200 PSI maximum at 73°F
  • Temperature Range0°F to 250°F (with EPDM)
  • StandardsASME B16.51, NSF/ANSI 61, NSF 372, and UPC/IPC compliant

Key Performance Advantages

  • ✅Press-Connect Technology– Enables consistent joint integrity with no soldering, reducing labor and downtime
  • ✅Branch Reduction– Allows for transition from two 1” lines to a 1/2” branch with minimal flow restriction
  • ✅Code-Approved Lead-Free Construction– Meets Safe Drinking Water Act (SDWA) requirements
  • ✅Corrosion-Resistant Design– Copper material withstands aggressive water conditions without degradation
  • ✅Tool-Verified Joint Security– Compatible with most industry-standard press tools and jaws

Recommended Applications

This reducing tee is typically used in potable water distribution, recirculation loops, and mixed-diameter hydronic piping networks. It is particularly useful in mechanical rooms, multi-unit housing, and retrofit projects where brazing is impractical or time-constrained.

Installation Guidance

Ensure pipe ends are properly deburred and cleaned before pressing. Use approved press tools calibrated to manufacturer specifications. Do not install in locations subject to freezing temperatures unless system is protected. Inspect EPDM seals before assembly for any deformation or debris. Not intended for use with gas or air services.

Compliance Note

All copper press fittings with diameters ≤2” must comply with lead-free legislation as outlined in NSF/ANSI 372. This product is fully compliant and suitable for use in systems requiring lead-free certification across all U.S. jurisdictions.

Designed for speed and reliability, the 1″ x 1″ x 1/2″ Copper Press Reducing Tee enables streamlined installation of transition branches without compromising pressure performance or code compliance. A trusted solution for professional plumbing systems.

Specifications

Specifications Weight 0.340000 Brand Non-Specified Brand ADA Compliance No Application Potable Water, Hydronic Heating (with Glycol), Chilled Water, Compressed Air (200 psi Max), Non-Medical Gases (140 psi Max), Low Pressure Steam (15 psi Max), Vacuum (24.5 in Mercury Max at 68 deg F) Length (inches) 1.45 Width (inches) 2.3 Height (inches) 3.25 End Style Copper x Copper x Copper Side A 1″ Side B 1″ Side C 1/2″ Fitting Type Tees Item Type Fittings Manufacturer Non Specified Manufacturer MPN PF 04051 Material Copper Product Family Fittings Warranty 50 Years Limited Item Returns This item can be returned

Buying Information

Confirm the listed size, connection, or rating details for MPN PF 04051 before ordering.

Brand

Non-Specified Brand

MPN

PF 04051

0
Scroll to Top