Skip to content
Need help identifying a part? Contact parts support
SKU: 6127Brand: Non-Specified Brand
,

1 inch x 5 inch Brass Nipple

$6.71

1″ x 5″ Brass Nipple – Threaded Connector for Potable Water and Mechanical Systems The 1″ x 5″ brass nipple is a straight pipe fitting designed for joining two female-threaded components in plumbing, HVAC, and general utility piping systems.

Quantity

1″ x 5″ Brass Nipple – Threaded Connector for Potable Water and Mechanical Systems

The 1″ x 5″ brass nipple is a straight pipe fitting designed for joining two female-threaded components in plumbing, HVAC, and general utility piping systems. Machined from lead-free brass, this fitting provides a corrosion-resistant, pressure-rated solution for potable water and other approved applications. Threads are manufactured to ANSI/ASME B1.20.1 standards for compatibility with NPT pipe systems.

Technical Specifications

  • MaterialLead-free brass (typically CW510L or equivalent; NSF/ANSI 61 and 372 compliant)
  • Nominal Size1 inch
  • Length5 inches overall
  • Connection TypeNPT (male x male), tapered threads per ANSI/ASME B1.20.1
  • Wall ThicknessSchedule 40 (standard weight)
  • Operating PressureSuitable for systems rated up to 200–300 psi depending on configuration
  • Temperature RangeUp to 400°F for non-steam liquid service

Installation Guidelines

Before installation, ensure that threads are clean and properly aligned. Use PTFE tape or compatible thread sealant rated for brass-to-metal joints. Tighten with a pipe wrench per recommended torque values for 1″ brass NPT fittings to ensure leak-free operation. Avoid over-torquing to prevent thread deformation.

Common Applications

This brass nipple is used in

  • Potable water distribution systems
  • Mechanical room piping and control manifolds
  • HVAC system supply and return lines
  • Compressed air, low-pressure steam (when approved), and industrial liquid conveyance

Material Consideration

Lead-free brass fittings provide excellent corrosion resistance and are compliant with federal regulations for potable water use. They are suitable for both indoor and exterior protected installations. In high-chloride or aggressive chemical environments, verify brass compatibility or consider alternate alloys.

Specifications

Specifications Weight 0.610000 Brand Non-Specified Brand ADA Compliance No Length (inches) 1.2 Width (inches) 1.2 Height (inches) 5 Side A 1″ Side B 5″ Fitting Type Nipples Item Type Fittings Manufacturer Non Specified Manufacturer MPN NBR055 Material Brass Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed size and threaded connection details for MPN NBR055 before ordering.

Brand

Non-Specified Brand

MPN

NBR055

0
Scroll to Top