1 Inch x 6 Inch Brass Pipe Nipple – NPT Threaded, Lead-Free
The 1 inch x 6 inch Brass Pipe Nipple is a straight fitting used for extending runs or joining two female-threaded components in water, air, or non-corrosive fluid systems. Constructed from lead-free brass, this nipple meets potable water code requirements and provides excellent resistance to dezincification and corrosion in harsh environments.
Material Composition and Standards
Fabricated from lead-free brass conforming to federal and state low-lead mandates, this nipple offers both strength and safety for pressure-rated plumbing systems. Threads are cut to NPT standards, ensuring compatibility with a wide range of fittings, valves, and equipment.
- ✅MaterialLead-free brass (per NSF/ANSI 372)
- ✅Length6 inches
- ✅Nominal Pipe Size1 inch
- ✅Thread TypeNPT (ANSI B1.20.1 standard)
Use Cases
Designed for systems requiring threaded connections in potable water, HVAC, or compressed air applications. Commonly installed in risers, manifolds, service lines, and pump connections. Suitable for both above-ground and in-wall use where temperature and pressure demands are within the fitting’s rated limits.
Installation Considerations
Threads should be cleaned and properly sealed using PTFE tape or approved pipe dope. Over-torquing should be avoided to prevent thread deformation or damage to mating components. The 6-inch length allows flexibility for vertical or horizontal extensions where rigid pipe spacing is required.
- ✅Working PressureUp to 200 PSI (varies by system)
- ✅Temperature Range0°F to 200°F typical service range
- ✅Sealant UseRequired for all NPT-threaded installations to prevent leakage
Compliance and Certifications
- Lead-FreeMeets requirements of Safe Drinking Water Act
- NSF CertifiedNSF/ANSI 61 and 372 for potable water contact
- UPC ListingListed for use in systems subject to local code enforcement
The 1 inch x 6 inch Brass Nipple is a reliable, code-compliant solution for extending piping or joining threaded components in professional-grade water and mechanical systems. Its corrosion-resistant construction and precise threading ensure leak-resistant joints in both residential and commercial installations.
Specifications
Buying Information
Confirm the listed size and threaded connection details for MPN NBR056 before ordering.




