Weil-McLain 2-1/2′ Cast Iron Baseboard Assembly – Complete Section
The Weil-McLain 190100006 baseboard assembly provides a reliable hydronic heating solution in a compact 2-1/2′ section. Constructed entirely from cast iron, this unit is engineered for closed-loop hot water or steam systems, delivering high thermal mass and excellent radiant comfort. Its sectional design ensures even heat distribution and supports both retrofit and new construction installations.
Application Overview
This complete assembly includes a 1-1/2′ left-hand section and a 1′ right-hand section, making it ideal for use along short perimeter runs or under low window walls where continuous fin-tube baseboard may not be practical. As with all Weil-McLain cast iron baseboards, it offers durability, low maintenance, and consistent output suitable for residential and light commercial applications.
Product Features
- Heavy Cast Iron ConstructionRetains heat efficiently and provides even radiation during off-cycles.
- Integrated End and Coupling Panel DesignFor seamless appearance and simplified assembly.
- Pressure RatedSuitable for standard closed-loop hydronic and low-pressure steam systems.
- Surface CoatingFactory-applied primer finish for field painting.
- MountingDesigned for direct wall or floor mounting using standard hardware (not included).
Technical Specifications
- Total Assembly Length30 inches (2.5 feet)
- Left Subsection18 inches
- Right Subsection12 inches
- MaterialCast Iron
- BTU OutputRefer to manufacturer performance chart for water temperature and flow rate specifics
- System CompatibilityHydronic hot water and low-pressure steam
Installation Guidelines
Proper installation requires alignment with system pitch for condensate drainage (steam) or air bleed clearance (hot water). Sections must be assembled per Weil-McLain’s installation manual using factory gaskets and nipple joints to ensure leak-free operation. For optimal results, this product should be installed by a licensed professional in accordance with applicable codes and mechanical specifications.
Recommended Use Cases
- Supplemental perimeter heating in bathrooms, entryways, and under bay windows
- Zone-based radiant output in custom hydronic layouts
- Baseboard replacement in cast iron retrofit projects




