Skip to content
Need help identifying a part? Contact parts support
Sale!
SKU: 104654Brand: Non-Specified Brand
,

2-1/2 inch PVC Schedule 40 45 Degree Elbow Plastic x Plastic

Original price was: $17.90.Current price is: $4.48.

2-1/2 inch PVC 45° Elbow – Schedule 40 DWV, Slip x Slip The 2-1/2 inch PVC 45° Elbow is a non-metallic DWV fitting used to create a directional change in drain, waste, and vent systems. This fitting allows for a 45-degree offset between pipe runs, facilitating smoother tran…

Quantity
SKU: 104654 Categories: ,

2-1/2 inch PVC 45° Elbow – Schedule 40 DWV, Slip x Slip

The 2-1/2 inch PVC 45° Elbow is a non-metallic DWV fitting used to create a directional change in drain, waste, and vent systems. This fitting allows for a 45-degree offset between pipe runs, facilitating smoother transitions in piping layouts where a gradual bend is required to maintain proper flow characteristics.

Manufactured from rigid polyvinyl chloride (PVC) conforming to ASTM D2665, this elbow is designed for solvent-weld installation with Schedule 40 PVC pipe. It offers chemical resistance, structural reliability, and dimensional consistency for gravity-flow DWV systems in residential and commercial construction.

Key Product Features

  • ✅Connection TypeSlip x Slip (socket ends for solvent welding)
  • ✅Angle45 degrees for gradual directional change
  • ✅MaterialPVC, conforming to ASTM D2665 and CSA B181.2 standards
  • ✅System TypeNon-pressurized DWV applications only
  • ✅Joint IntegrityDesigned for use with approved primer and solvent cement for leak-free joints

Installation Guidelines

Cut and deburr pipe ends prior to assembly. Apply ASTM F656 primer and solvent cement to both the pipe and the fitting socket, then insert the pipe fully and hold in place until the joint sets. Allow adequate cure time per cement manufacturer instructions before testing or backfilling.

Application Scope

This 45° elbow is commonly used in above- and below-grade sanitary drainage systems, including branch offsets, horizontal-to-horizontal directional changes, and vent offsets. It supports vertical and horizontal configurations in both new installations and retrofit applications.

Regulatory Compliance

Certified to meet UPC and IPC plumbing code requirements for DWV systems. Approved for use in non-pressurized drain, waste, and vent piping in accordance with model code specifications.

Technical Specifications

  • Nominal Size2-1/2 inches
  • Angle45 degrees
  • ConnectionSlip x Slip (solvent weld)
  • Material StandardASTM D2665, CSA B181.2
  • ApplicationDWV systems – non-pressurized use only

The 2-1/2 inch PVC 45° Elbow provides a cod

Specifications

Specifications Weight 0.620000 Brand Non-Specified Brand ADA Compliance No Angle 45 Deg Length (inches) 6.01 Width (inches) 3.34 Height (inches) 3.34 End Style Plastic x Plastic Side A 2-1/2″ Side B 2-1/2″ Fitting Type Elbows Item Type Fittings Manufacturer Non Specified Manufacturer MPN 417-025 Material PVC Schedule 40 Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

417-025

0
Scroll to Top