2-1/2 Inch x 1 Inch Black Iron Bushing – Threaded Reducing Fitting
The 2-1/2 inch x 1 inch Black Iron Bushing is a threaded reducing fitting used to transition between larger and smaller nominal pipe sizes within piping systems. Commonly used in gas, steam, and water distribution networks, it provides a solid and pressure-rated solution where a reduction in pipe diameter is required within a threaded connection layout.
Product Features and Field Benefits
- ✅Threaded NPT Design– Male NPT threads on the larger end and female NPT threads on the smaller end ensure compatibility with standard iron pipe fittings.
- ✅Black Malleable Iron Construction– Offers robust mechanical strength for structural integrity in high-temperature and high-pressure environments.
- ✅Corrosion Resistance– Black iron finish protects against scaling and surface deterioration under dry and low-moisture conditions.
- ✅Reduced Profile– Compact form factor minimizes fitting footprint, enabling use in limited-clearance configurations.
Technical Specifications
- MaterialMalleable black iron
- Connection TypeMale NPT (2-1/2 inch) x Female NPT (1 inch)
- Pressure RatingMeets applicable ANSI/ASME B16.3 specifications for Class 150 fittings
- Application RangeGas, oil, steam, and water (non-potable) systems
Installation Guidelines
This bushing should be installed using standard pipe wrenches with appropriate thread sealant (e.g., PTFE tape or thread compound) to ensure a leak-tight seal. Over-tightening should be avoided to prevent stress cracking or thread distortion. Proper alignment is essential for pressure-rated performance, especially in gas service installations.
Typical Applications
Used extensively in mechanical and industrial piping systems, this reducing bushing is suitable for use in
- Gas distribution systems (natural gas, propane)
- Steam lines and condensate return systems
- Closed-loop hydronic heating systems
- Low-pressure air and water supply lines (non-potable)
Standards and Compliance
Manufactured in accordance with ANSI/ASME B16.3 and ASTM A197. Designed to work with pipe conforming to ASTM A53 or A106 specifications.
The 2-1/2 inch x 1 inch Black Iron Bushing delivers consistent, code-compliant performance where size reduction and pressure retention are required in threaded pipe systems. Its rugged construction and compatibility with standard NPT systems make it a practical choice for contractors working on demanding installations.




