Skip to content
Need help identifying a part? Contact parts support
SKU: 7828Brand: Non-Specified Brand
,

2 inch Black Iron Tee Female x Female x Female

$3.32

2 inch Black Malleable Iron Tee – Threaded F-F-F for Gas and Water Distribution The 2 inch Black Malleable Iron Tee is a triple-female threaded fitting used to join three sections of pipe at a 90-degree angle.

Quantity
SKU: 7828 Categories: ,

2 inch Black Malleable Iron Tee – Threaded F-F-F for Gas and Water Distribution

The 2 inch Black Malleable Iron Tee is a triple-female threaded fitting used to join three sections of pipe at a 90-degree angle. Manufactured from ASTM A197 malleable iron and finished with a protective black coating, this fitting is engineered for use in low-pressure gas, steam, and water distribution systems in commercial and residential applications.

Key Product Advantages

  • ✅Threaded NPT EndsComplies with ANSI B1.20.1 standards for National Pipe Taper (NPT) threads, providing a secure, leak-resistant seal when properly installed with thread sealant.
  • ✅Malleable Iron BodyOffers excellent ductility and impact resistance for robust mechanical performance under installation torque and system stress.
  • ✅Black FinishSuitable for non-potable applications including fuel gas, fire protection, and HVAC systems; not intended for potable water due to lack of corrosion-resistant lining.
  • ✅Pressure-RatedTypically rated up to 150 psi for steam and 300 psi for non-shock water, air, or oil applications, depending on assembly integrity and code adherence.
  • ✅Versatile IntegrationAllows for lateral take-offs or directional flow control within piping assemblies in utility rooms, mechanical closets, or service risers.

Technical Specifications

  • MaterialASTM A197 Grade malleable cast iron
  • FinishBlack (oil-coated)
  • Nominal Size2 inch
  • Connection TypeThreaded (FPT x FPT x FPT)
  • ComplianceMeets ASME B16.3 and UL/FM standards when specified

Typical Applications

This 2 inch black iron tee is widely used in low-pressure systems where directional flow between pipe branches is required. Typical installations include

  • Natural gas or propane piping
  • Steam and hot water heating loops
  • Compressed air systems
  • Fire sprinkler mains (non-potable)

Installation Notes

Use pipe joint compound or PTFE tape on male threads to achieve a proper seal. Avoid over-torquing to prevent thread distortion. Ensure alignment and support across all three directions to minimize stress on the fitting during service.

Did You Know?

Malleable iron is preferred over cast iron in many pressure-rated plumbing systems because of its superior ability to flex without fracturing, which enhances reliability during temperature swings and mechanical vibrations.

For professionals seeking a robust, code-compliant tee fitting for gas and water systems, the 2 inch Black Malleable Iron Tee offers dependable performance and compatibility across a wide range of field applications.

Specifications

Specifications Weight 2.320000 Brand Non-Specified Brand ADA Compliance No Length (inches) 2.85 Width (inches) 4.4 Height (inches) 3.75 End Style Female x Female x Female Side A 2″ Side B 2″ Side C 2″ Fitting Type Tees Item Type Fittings Manufacturer Non Specified Manufacturer MPN 520-608 Material Black Iron Product Family Fittings Item Returns This item can be returned
Brand

Non-Specified Brand

MPN

520-608

0
Scroll to Top