Skip to content
Need help identifying a part? Contact parts support
SKU: 1991038Brand: Apollo PowerPress
,

2 inch Carbon Steel 417G Gas Press Cap

$19.58

2″ Carbon Steel Press Cap – Press-Fit End Closure for Sealed System Terminations The 2″ carbon steel press cap is a mechanical end fitting used to terminate press-fit piping systems in closed-loop hydronic, compressed air, and non-potable water installations.

Quantity
SKU: 1991038 Categories: ,

2″ Carbon Steel Press Cap – Press-Fit End Closure for Sealed System Terminations

The 2″ carbon steel press cap is a mechanical end fitting used to terminate press-fit piping systems in closed-loop hydronic, compressed air, and non-potable water installations. Manufactured from ASTM A105 or equivalent carbon steel and finished with corrosion-resistant zinc or e-coat, the fitting provides a secure, permanent seal when installed using compatible press tools and jaw profiles.

Technical Specifications

  • Nominal Size2 inch
  • MaterialCarbon steel, typically ASTM A105 or A53 Grade B
  • ConnectionPress-to-connect (compatible with standard press tools using M-profile jaws)
  • Pressure RatingUp to 200 psi (dependent on system design and application)
  • Temperature RangeTypically -20°F to 250°F (verify with manufacturer specifications)
  • Standards ComplianceManufactured to meet ASME B31.3, MSS-SP-78, and applicable IAPMO or ICC listings for press fittings

Installation Guidelines

Install using approved press tools with calibrated M-profile jaws for carbon steel. Ensure that pipe ends are properly deburred and marked for insertion depth prior to pressing. No soldering, threading, or welding is required. Press joints form a permanent mechanical seal; verify with appropriate pressure testing before commissioning the system.

Application Areas

This carbon steel press cap is commonly used in

  • Closed-loop hydronic heating and cooling systems
  • Industrial process piping (non-corrosive media)
  • Compressed air systems
  • Fire protection systems (non-potable, wet pipe where approved)

Material Consideration

Carbon steel press fittings should only be used in dry or closed systems that do not involve potable water or corrosive agents unless specifically approved. External protection may be necessary in areas subject to moisture or chemical exposure to prevent surface oxidation.

Specifications

Specifications Weight 1.410000 Brand Apollo PowerPress ADA Compliance No Length (inches) 2.44 Width (inches) 2.91 Height (inches) 2.91 Side A 2″ Fitting Type Caps Item Type Fittings Manufacturer Aalberts Integrated Piping Systems MPN PWR7482521 Material Carbon Steel Product Family Fittings Item Returns This item can be returned

Buying Information

Confirm the listed model and configuration against the application before ordering.

Brand

Apollo PowerPress

MPN

PWR7482521

0
Scroll to Top